News for hackers. Stuff that matters.
Re:Tesla Model 3 Falls Short of a CR Recommendation by dragontamer on Monday May 21, 2018 @02:35PM (#17120613)
But braking is a solved problem. Apply the maximum force to the tires, until right before the tires begin to slip. Then, reduce the force to prevent slipping. Stay within the "static coefficient of friction", which is higher than "dynamic coefficient of friction".

Alternatively, there's also "let the human do it". (Aka: threshold braking), but most people prefer to have the computer do this task during an emergency.

This algorithm has been used in anti-lock brakes for decades at this point. I'm not sure why it would need an OTA update to improve. Once this algorithm is properly implemented, then the only thing left is to buy better tires and use better rubber to get better grip.

This CR report suggests that Tesla's braking behavior is suboptimal. There's no reason for a smaller, lighter Model 3 to have a worse braking distance than the freaking F-150 truck.

Re:Tesla Model 3 Falls Short of a CR Recommendation by gnode on Monday May 21, 2018 @03:01PM (#17120827)
> But braking is a solved problem.

That's not to say Tesla haven't decided to re-solve it / implement it themselves anew. The rest of the auto industry has been doing ABS much longer than Tesla has existed.

It's also not a prescriptive algorithm. ABS systems don't stay within the static coefficient of friction; they repeatedly retest the boundary between static and dynamic friction (hence the judder). It's a bit like optimising TCP window size for those familiar with it. There are a bunch of parameters you can tune.

Re:Tesla Model 3 Falls Short of a CR Recommendation by londons_explore on Monday May 21, 2018 @03:41PM (#17121171)
It also depends what your goal is.

Typical ABS systems typically perform far worse on gravel or sand than non-abs systems for example. It turns out on gravel locking the wheels is usually a better solution because then you start to plough deep into the gravel.

No ABS system could determine that beforehand, since it isn't to know if the gravel is deep (allowing ploughing deep into it) or shallow (where staying on the boundary of static/dynamic friction works better).