Re:Canon's 120MP Camera Sensor
by stan_rogers on Thursday March 29, 2018 @02:41PM
(#16709849)
You'd need to be using Kodak Technical Pan at a rated speed of 12 to 16 (before filter factors, for continuous-tone images with smooth gradients) in order to get there, though. Kodachrome 25 (in the K14 process version) and Ektar 25 weren't terribly far behind, but neither had a great deal of latitude. And you'd also need something a little flatter than the typical film aperture and pressure plate to really use it. More typical 35mm films - those with usable sensitivities for general photography - wouldn't get you anywhere near there.
[ Parent
| on HN ]
Re:Canon's 120MP Camera Sensor
by abritinthebay on Thursday March 29, 2018 @04:18PM
(#16710671)
Sure, there’s tons of variation of course and 87 is the upper limit, but from what I’ve read it’s still the 40-50MP range before you hit the limits of a decent typical 35mm film.
Lens quality does start to become a factor a bit earlier than that too.
A lot of the comparisons I've read (and internally Leica's own tests) say otherwise.
https://petapixel.com/2014/12/18/comparing-image-quality-fil...
Re:Canon's 120MP Camera Sensor
by abritinthebay on Friday March 30, 2018 @11:58PM
(#16721639)
I mean... in that very article the 80MP camera looks worse than film (tho more sharpened, go go digital image processing!)
You appear to have provided counter evidence to your own position.
Take a look at the 35mm section, that's explicitly not the conclusion of the article.
"The results are very impressive and from our comparisons we think scanned color slide film has a digital equivalent resolution of between 12MP and 24MP depending on what aspect you look at (12MP for overall sharpness appearance, 14-16MP for luminosity resolution, and 24MP for color resolution). These figures are estimates based on a good Imacon or Drum scan and would be even higher for projected or enlarged images."
So you're basically reading that and going, well I think I'm right anyway.