News for hackers. Stuff that matters.
Re:Foxconn buys Belkin for $866M by peterwwillis on Monday March 26, 2018 @11:16PM (#16684909)

  > > The majority of differences between routers is just firmware and packaging, the guts are all the same.
  > 
  > The firmware is the part you really have to worry about, though
Professional quality routers often use ASICs to handle most of the processing, which is quite a bit faster, engineered to perform at specific workloads, and is more reliable. [1] Big iron gear are often specialized versions of blade servers. [2] And tons of software controls go into the CPU and software design to protect against firmware hacks, reverse-engineering, data exfiltration, counterfeit parts, insecure connections, license tampering, and hardening against internal compromise. [3] Aside from the CPUs and other guts inside the router, newer Cisco gear supports network adapters from Broadcom, Intel and QLogic.

[1] https://blogs.cisco.com/wireless/not-all-802-11ac-aps-are-cr... [2] https://www.cisco.com/c/en/us/products/servers-unified-compu... [3] https://www.design-reuse.com/articles/20671/security-embedde...

Re:Foxconn buys Belkin for $866M by electrum on Tuesday March 27, 2018 @12:31AM (#16685258)
You can see an open source version of "big iron" networking gear, both hardware [1] and software [2]. They also use ASICs for most of the work and run Linux on the host CPU (so they can be managed like normal servers).

[1] https://code.facebook.com/posts/843620439027582/facebook-ope... [2] https://github.com/facebook/fboss

Re:Foxconn buys Belkin for $866M by kingosticks on Tuesday March 27, 2018 @04:59AM (#16686568)
> Our Wedge top-of-rack switch follows this basic design and uses a single Broadcom Trident II ASIC

The chassis may be open-source but the guts of that thing is a (high-end Broadcom chip, just like everyone else.

Re:Foxconn buys Belkin for $866M by wtallis on Tuesday March 27, 2018 @04:09AM (#16686344)
I don't think Belkin/Linksys operates in those market segments. It doesn't appear that they have any rackmount routers at the moment, just a tiny VPN router and some rackmount Ethernet switches. The rest is WiFi routers that are unlikely to have any significant hardware acceleration beyond a built-in Ethernet switch with basic NAT capability. There's not much separation between data plane and control plane in those products.