News for hackers. Stuff that matters.
Re:Why collision avoidance is harder for an AI-based system by wnoise on Monday March 26, 2018 @05:55PM (#16682996)
You don't have to "construct an image" to use LIDAR returns. Minimal processing on the point cloud will tell you that there's an obstacle, and you don't need more than that to start trying to avoid hitting it. A simple occupancy grid map, for instance, would suffice.

https://en.wikipedia.org/wiki/Occupancy_grid_mapping

Re:Why collision avoidance is harder for an AI-based system by nabla9 on Monday March 26, 2018 @06:18PM (#16683153)
The problem with naive occupancy grid mapping from sparse LIDAR data is that things like birds, falling leaves, pieces of paper of plastic bags flying in the wind can mark the grid occupied.

Emergency breaking for all these cases would be very dangerous. The same object must be scanned multiple times to get the idea if the object is something to be avoided.

Re:Why collision avoidance is harder for an AI-based system by wnoise on Monday March 26, 2018 @06:24PM (#16683198)
Quite true -- but LIDAR has a very high refresh rate, and it's not hard to do better than naive grid mapping. This was a full height pedestrian plus bicycle, which would have multiple nice returns from a Velodyne HDL 64 at these distances.
Re:Why collision avoidance is harder for an AI-based system by smileysteve on Monday March 26, 2018 @11:19PM (#16684919)
Birds, plastic bags, cardboard boxes, small pieces of wood, and pieces of tires are perfectly good reasons to apply brakes and drive with caution to avoid.