Re:Continuing frequency deviation in the Continental Europea...
by pjc50 on Wednesday March 07, 2018 @08:12AM
(#16536098)
The UI for entering the Wifi password is always the biggest problem with these things. The Dash buttons have an interesting solution involving audio.
Re:Continuing frequency deviation in the Continental Europea...
by a1369209993 on Wednesday March 07, 2018 @05:48PM
(#16540717)
You could try a USB SATA drive with a FAT16 filesystem containing "/wifipass.txt". USB-1.0 low speed is 1.5Mb/s and while I can't find documentation on ESP8266's GPIO switch speed, it's CPU is 40MHz, so bitbanging should be feasible.
Re:Continuing frequency deviation in the Continental Europea...
by Drdrdrq on Wednesday March 07, 2018 @10:43AM
(#16537123)
One solution would be qr scanner...
Re:Continuing frequency deviation in the Continental Europea...
by c3833174 on Wednesday March 07, 2018 @09:47AM
(#16536704)
Or just reporpose an old phone.
Re:Continuing frequency deviation in the Continental Europea...
by mseebach on Wednesday March 07, 2018 @10:31AM
(#16537021)
I was thinking about this in terms of building a product.
Even with that, a clock generally runs for months, even years, on a single battery. Not exactly phone territory, but might be feasible on the ESP8266, depending on how the oscillator behaves in deep sleep mode.
Re:Continuing frequency deviation in the Continental Europea...
by sokoloff on Wednesday March 07, 2018 @01:37PM
(#16538633)
There are many dedicated real time clock chips, pre-designed for backup time-keeping and low power usage. Interfacing with one is going to be way faster/easier/better than trying to roll your own on a general purpose microcontroller, IMO.
TI's bq32000 is $0.55@1K, is 3.3V for easy interface to the ESP, and takes just over 1 microamp in backup power mode. That's just one that I quickly poked at.
(Side note: at this point, I'd think I'd want to be using an ESP32 in any new designs.)
On a only barely related note, I've been playing with the idea of implementing a NTP synced clock on an ESP8266. It'd wake up, join wifi and sync NTP every few hours, then keep time on its internal crystal in between. It should be a good deal cheaper, work anywhere in the world, and have better indoor coverage (I have a DCF77 clock in an interior bathroom in London, and it never syncs. Kind-of defeats the purpose that I have to move it to a south-facing room for the day to get it to sync).