Same here. You can build virtually anything in software.
The point I was sarcastically making was that even in SDRs you still have a downconversion via either Direct Converting or SuperHet to baseband so your signals are in the right frequency reference that you don't completely saturate your DSP/FPGA/CPU.
I love software as much as anyone else but just saying that you can do everything in SW is a bit disingenuous.
I wrote "So now anything that I do that has to have an effect in the real world is put together with the absolute minimum in interface hardware and the remainder is software." and the other person wrote "virtually".
Hardly.
Power usage in SW(or FPGA) vs ASIC is easily an order of magnitude difference. For most battery based solutions software based signal processing is right out.
Latency is another, your CPU is going to introduce both jitter and long latency compared to a discrete software solution.
Software also can't handle raw speeds involved in a lot of things. There's not a single CPU out there that can natively handle 5GHz wifi off of the wire. That's why even direction conversion SDRs use a frequency mixer to lower the data rate down to something a DSP can handle.
If you imagine we’re talking about someone’s hobby prototype projects, designing all of those things you mentioned takes skill, experimentation, time, parts, assembly, likely a team collaboration, etc. The combinations of parts get conceptually complicated and the feedback loops during the development process get slower and slower.
Obviously there are reasons to use custom-designed hardware if you are a corporation and you are building a million identical devices, or if you have extreme bandwidth or latency needs that a modern CPU literally can’t keep up with, etc.
But that’s a very different context than what the people several posts up are talking about.
P.S. if you pile your posts with abbreviations your readers have a harder time figuring out what you are talking about.
Or power, plenty of battery powered things in the hobby space where using discrete hardware optimized for low power usage is necessary. Discrete hardware doesn't have to be an ASIC, it's still possible to string together a opamps and other SMD parts pretty easily these days.
It doesn't share much, if anything with serial software and you use the same tools(VHDL/Verilog/etc) as ASIC design.
I still like electronics, but software has spoiled me.
So now anything that I do that has to have an effect in the real world is put together with the absolute minimum in interface hardware and the remainder is software.