Re:18 year old BBC Micros used in retro programming class
by forinti on Wednesday August 25, 2010 @08:50AM
(#1632674)
Well, this is Brazil (hot and humid) and they did have to endure about 10 years in my dad's shed, so I didn't really expect them to still work. The BBC, on the other hand, only requires maintenance on the power source's capacitors every 10 years or so (I've changed them twice so far). It's quite a sturdy machine!
Re:18 year old BBC Micros used in retro programming class
by jacquesm on Wednesday August 25, 2010 @08:58AM
(#1632685)
Yes, electrolytic caps tend to dry out over time. There are special ones that are mil-spec that don't have that problem, or you could try your luck with Tantalum.
The Sprague brand used to have fairly affordable long life electrolytic caps, maybe you can find those where you live or order them online. That way it's a one time affair.
On another note, if you open up the power supply you'll find a bunch of coils in there, some of them are fairly loosely wound, eventually the windings will rub their way through the insulation and short out. It's not a bad idea to put some hotmelt on those windings to dampen the vibration. Just a little line on either side will do wonders.
The disks is a harder problem, surprising though, that they've already degraded that much, I would have expected the 5 1/4" to be readable a bit longer than this.