News for hackers. Stuff that matters.
Re:Original Sketch of the Ethernet Concept by adulau on Wednesday August 18, 2010 @01:43AM (#1613352)
There is even the famous memo at XEROX sent to Bob Metcalf:

http://www.belsambar.net/mediasink/images/ethernet_memo.jpg

basically saying that Ethernet is not realistic on an engineering perspective. The memo makes me feel better when I'm reading reviews for a submitted paper at a conference.

Re:Original Sketch of the Ethernet Concept by woodrow on Tuesday August 17, 2010 @07:06PM (#1612727)
BGP, the Internet routing protocol, was sketched out similarly, on three napkins: http://www.youtube.com/watch?v=HAOVNYSnL7k#t=5m35s
Re:Original Sketch of the Ethernet Concept by lurkinggrue on Tuesday August 17, 2010 @08:07PM (#1612846)
Looking at that I had horror-flashbacks to thinnet.

Shudders

Re:Original Sketch of the Ethernet Concept by Hoff on Tuesday August 17, 2010 @08:16PM (#1612862)
FWIW, that's thick-wire with a vampire tap.

Not ThinWire.

The early DEC H4000 transceivers were rather larger than that transceiver, too.

Re:Original Sketch of the Ethernet Concept by ja27 on Tuesday August 17, 2010 @10:07PM (#1613043)
"Frozen garden hose"

It's somewhat ironic that I've repurposed a lot of old RG-58 thinnet for ham radio use. I wonder if salvaged RG-8 thicknet is still pretty useable for HF or even VHF radio if you plug the holes from vampire taps?

Re:Original Sketch of the Ethernet Concept by Hoff on Friday August 20, 2010 @08:52AM (#1620233)
The RG8 was originally quite good for this use.

Used cable? Test it. The usual "fun" with the vampire taps were fragments of the shielding that became entrained by the drill bit or when the tap was removed.

And after all these years, corrosion around where the vampire taps had been mounted, material degradation, and damage when the cable is removed from service.

The old VAX Computer Interconnect (CI) cable from DEC was even better for this usage and that stuff didn't get tapped, but it is harder to find these days. There were a number of radio clubs in New England that used that cabling as feed lines.

Re:Original Sketch of the Ethernet Concept by eru on Tuesday August 17, 2010 @06:10PM (#1612629)
Ether everywhere!