Re:I amplified my home's Wi-Fi with aluminum foil
by arghwhat on Wednesday December 27, 2017 @02:37PM
(#16017341)
As you already have a working dipole (which you have in this case), the primary thing to consider is the element lengths and spacings. If you don't have one of those routers with massive (and empty!) plastic antennas, there's probably a good chance that you can use the authors design parameters.
Otherwise, there's plenty of 3-element Yagi-Uda calculators online where you can stuff in various amounts of parameters and get the unknowns—the author used fancy antenna simulation software, but you don't need that.
A few links:
http://www.rfwireless-world.com/calculators/3-element-Yagi-A...
http://www.changpuak.ch/electronics/yagi_uda_antenna_DL6WU.p...
Re:I amplified my home's Wi-Fi with aluminum foil
by alinspired on Wednesday December 27, 2017 @05:29PM
(#16018602)
Thank you, arghwhat
In short, I'm looking for logic to repeat this for my router's dipole antenna and possibly with custom wires (not #14 or paperclips of unknown thickness mentioned there)