Re:How to build a wireless street lighting system
by danbruc on Saturday November 04, 2017 @09:43AM
(#15624969)
Aren't existing street lights already remotely controlled with the control signals modulated onto the power line? I am less sure about a back channel but I am pretty sure street lights are not turned on by simply turning on the power.
[ Parent
| on HN ]
Re:How to build a wireless street lighting system
by ghouse on Saturday November 04, 2017 @11:16AM
(#15625390)
Most are turned on locally by a photocell mounted on the street light.
Re:How to build a wireless street lighting system
by danbruc on Saturday November 04, 2017 @11:56AM
(#15625587)
There is then probably considerable variation from place to place, but in Germany they usually follow a schedule turning on and off at specific times. It is also not uncommon that every second or so street light gets turned off late in the night. Sometimes they also turn on outside of the usual hours if it is especially dark due to dense clouds or heavy snowfall but I can not really tell whether this is sensed locally at the street light or centrally controlled.
EDIT: Just checked the German Wikipedia article and at least here all kinds of different systems with varying levels of granularity and autonomy are in use. Some cities seemingly even installed systems that allow turning on the street lights in specific streets or areas on demand via call or SMS during the late night.
Re:How to build a wireless street lighting system
by zeeZ on Saturday November 04, 2017 @12:19PM
(#15625687)
In Germany the most common is centrally controlled. Usually a couple streets are connected to a controller, which is either triggered by a signal modulated over the regular mains from the local power provider or a central sensor, or triggered by a sensor connected to the controller.
It's usually not individual lamps, but large streets, blocks, or entire neighborhoods at once.