I dont known anything, but a Knowles MEMS microphone on digikey is $1 qty 1 [0]. A few 100 uA consumption.
I'm pretty sure there is space for disruption here.
[0] : https://www.digikey.com/product-detail/en/knowles/SPW2430HR5...
Re:Why Are Hearing Aids So Expensive?
by AstralStorm on Tuesday October 24, 2017 @06:11AM
(#15540504)
Yes, MEMS microphones of ok quality are a few dollars but you need a few or an array (worse quality ones are cheaper), balanced armature of good quality are not cheap.
This one has really bad SNR (-42 dB)
The space requires micromechanical research and manufacturing expertise. Good luck "disrupting" it.
Re:Why Are Hearing Aids So Expensive?
by blattimwind on Tuesday October 24, 2017 @08:06AM
(#15540935)
- Does not work with the available voltage
- Far too big
- Requires about 1/3 of the entire power budget
> I'm pretty sure there is space for disruption here.
[hackernews noises]
> That runs a few days and does not sound terrible?
If they are 1/10th the cost, then the number of people that could benefit goes up tremendously. I'm sure lots of people would accept having two sets that they have to charge every night if the alternative is not having any.
See, one balanced armature transducer will cost you about this much. Electronics is not the problem, power requirements and miniature size are. In a hearing aid, the main power cost is the transducers (including MEMS microphones) and amplifiers.
BA transducers are so expensive because only 3 companies make them. (Knowles, Sonion and one other I do not remember off the top of head.) Only a few more make MEMS microphones.
This is also on the verge or actually nanotechnology which is why Chinese manufacturers couldn't get in.
Trying to use a dynamic driver or microphone instead will cost you about half of battery life and will be larger.