Re:GM to buy LIDAR sensor-tech firm Strobe
by joshvm on Monday October 09, 2017 @05:57PM
(#15437812)
Your last example is a standard laser triangulation rig. They're extremely simple to build and give excellent accuracy. Here's an example system I was involved with for cast steel: https://doi.org/10.1109/CRV.2016.55
The pedant in me wants to point out that laser triangulation has nothing to do with LIDAR, even though it's commonly lumped in. It's basically a parallax measurement, whereas LIDAR refers explicitly to time of flight (either direct or by proxy from phase/frequency offset).
Mostly they're used for profiling on conveyor-based systems - anything where the target moves underneath the stripe. The downside is usually a big trade off with accuracy and depth of field; and usually their usable range is poor (> 5m and you're struggling and have eye safety problems). You can buy nm-precision systems, but they only work within a range of a few cm. Also the triangulation angle is important - the further away you go, the wider your laser-camera baseline needs to be to retain accuracy.
The pedant in me wants to point out that laser triangulation has nothing to do with LIDAR, even though it's commonly lumped in. It's basically a parallax measurement, whereas LIDAR refers explicitly to time of flight (either direct or by proxy from phase/frequency offset).
Mostly they're used for profiling on conveyor-based systems - anything where the target moves underneath the stripe. The downside is usually a big trade off with accuracy and depth of field; and usually their usable range is poor (> 5m and you're struggling and have eye safety problems). You can buy nm-precision systems, but they only work within a range of a few cm. Also the triangulation angle is important - the further away you go, the wider your laser-camera baseline needs to be to retain accuracy.