Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by userbinator on Saturday September 16, 2017 @07:55PM
(#15267431)
What that means from a practical standpoint is that you are essentially guaranteed an unrecoverable bit read error if you read the drive end to end
That sounds scary, but if I remember a research paper from a few years ago (reading smaller drives multiple times over), these are very conservative estimates.
Also, I think you're an order of magnitude off --- 10^15 bits is close to 100TB, not 10TB.
Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by wiredfool on Saturday September 16, 2017 @04:40PM
(#15266621)
I remember my first 1 gig drive, it was a full height 5 1/4" external scsi, with the giant 50 pin cable. You could hear the seeks from other rooms.
Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by jnwatson on Saturday September 16, 2017 @04:47PM
(#15266656)
You guys are making me feel old. My father bought my first 20 MiB hard drive used for close to $1000. It was the size of a VCR and sounded like a jet engine.
Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by js2 on Saturday September 16, 2017 @05:31PM
(#15266870)
I'll join in. My first HD was a 40 MB Seagate 5.25 for $900, attached to an Apple //gs.
Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by rootusrootus on Saturday September 16, 2017 @05:57PM
(#15266965)
I once had a Miniscribe 40MB drive that would actually cause the desk to visibly shake when you were reading & writing to it.
Re:Western Digital Ships 12 TB WD Gold HDD: 8 Platters and H...
by basicplus2 on Saturday September 16, 2017 @09:24PM
(#15267744)
My first HDD was 5mb and it would shake the desk from inside the XT computer too :)
Interestingly, still 1 in 10^15 unrecoverable bit error rate[1]. What that means from a practical standpoint is that you are essentially guaranteed an unrecoverable bit read error if you read the drive end to end (as you would if you were re-silvering a RAID 1 mirror), and in a RAID6 configuration I'm guessing it will take about a week to reconstruct a failed drive at low priority. All that storage behind a single port which has a sequential transfer rate of 255 MBs[1].
[1] https://www.wdc.com/content/dam/wdc/website/downloadable_ass...