It's funny how in Canada we have some specific remnants of the imperial system. Most people under 50 have no idea what a Fahrenheit is (myself included), except for pool water and oven temperature. Go figure.
People complain about inconsistency and lack of standards in the use of measurements in the U.S, but it is actually much more consistent there. It turns out that decimal units aren't really better for any practical purpose in a typical person's life, and it's certainly worse if you need to know both!
Even in the U.S. of course, engineers, mechanics, plumbers and others still have to deal with a mix. Think metric-based and imperial-based bolts, metric v. imperial lumber sizing.
s/U.S./the entire world/
It's very common to have international U.S. based companies offer N types of fasteners/whatever in imperial sizes, but only N/2 in metric. So we frequently build stuff in imperial sizes because of greater flexibility.
And don't get me started on (non)tapered pipe threads... I've heard some horror stories of huge subassemblies built in Europe using BSPT and shipped to the U.S. for final assembly, where of course everything else is NPT, so some poor sod has to spend a month replacing all subassembly fittings.
Probably because when you're speaking about them colloquially, you don't say "kilometres" you say "kays". That probably varies by locale too, I'm in en_AU. How is it over your way?
I do like the nerdiness in the idea of saying "two megs" instead of "two thousand kays", but it's never going to happen.
It's mixed here in en_CA (I've lived in Calgary, Vancouver, and Toronto at different points). In my experience, kay is used for kilometres when talking about manual travel/exercise (bicycle, running) as in "couch to 5k", but it's almost always klicks or kilometres when talking about driving, and usually only kilometres when talking about most other forms of transport.
Temperatures are usually in Celsius but are shown in F once it gets hot (100 degrees sounds better than 38).
Even though I'm a fan of the metric system, being in the US is easier than the UK, at least measurements are consistent...
There are other oddities and mixed units. Dates are in "drunk endian" with month/day/year format, indoor areas are measured in square feet and outdoor areas in acres... Small units of length are in fractions of an inch unless you're a machinist at which point they're in "thous" or "mills" (same thing, 1/1000 inch) or "tenths" (1/10000 inch). Drill sizes are fractions of an inch for some common sizes and large diameters (27/64 and up are always fractional), but otherwise are numbered starting at 80 and decreasing down to 1 as diameter increases with the spacing between numbers being inconsistent, except for a series starting at 2340 thou and ending at 4130 thou which is lettered with 40 thou between letters (mostly, some inconsistencies here). But you can still get drills in some of the fractional inch sizes that fall between the letters. Seriously, look at a tap drill chart[1]. And of course if you're a machinist you'll also have to deal with metric items imported from the rest of the world or made for sale there so you'll also need all the metric drill and tap sizes.
[1]http://www.brokenbolt.com/images/starrett-inch-metric-tap-dr...
Electric systems use SI units, except that PCB designers tend to use thou for trace sizes and spacing. Some components have pin spacing in thou, others in mm. Getting the PCB to look nice with a mix of pin pitches and grid sizes is more of a chore than it should be.
"K" is short form thousands as well written and pronunciated "k".
Ex:
20,000 = 20k.
But when talking about distance specifying units, you say the thousands and "k" as in short form kilometers.
20,000km is pronounced: "twenty thousand k" or kilometers.
But if not specifying the unit, you could say I drove twenty "k", as in "I drove 20 thousand (kilometers)"
But they are not the same!!oneoneone. Unless you are in the dog food prefixes camp. Are you?
You're not thinking of the mebi-, kibi-, etc debacle, are you?
Ah... screw it: https://www.xkcd.com/394/
English as first language, but 2nd/3rd language for immigrant parents.
I have very rarely seen space separator for thousand seperate, maybe one some bank drafts.
Everyone I know, and I have used the comma seperate.
Officially may be a Canadian thing, but not used really
I'm inoculated against confusion about this because I've done a lot of software and content localization, and have a grasp on the specifics for a lot of different cultures.
I think the problem is exacerbated by the underuse of the SI system's prefixes. Why even talk about thousands of kilometres when you can speak in tens of megametres?
Added:
I figure it's getting to the point where there are too many genuine English locales to keep up. It takes a lot of energy for normal people to retain fluency in dialects and locales like en_US, en_IN, en_CA (thankfully rapidly merging with en_US), en_GB, en_AU, en_JM, en_MY, etc. etc. etc.. all at the same time. Maybe at some point there will be a great and natural convergence.