Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by biktor_gj on Wednesday July 05, 2017 @01:19AM
(#14700106)
All Cisco, HP ProCurve etc. still use serial (they tend to have serial over USB these days) interface for configuration. You can connect via SSH / telnet, but to configure the management interface you first need to connect to that serial port and give it an IP address...
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by mmarx on Wednesday July 05, 2017 @02:18AM
(#14700285)
HP/HPE/Aruba switches have shipped with DHCP enabled in the factory config for at least the last seven years, so you very much don't need a serial console to configure those. The Cisco WLAN controller I came across last week, however, wouldn't do anything until you plugged in a serial cable.
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by tsomctl on Wednesday July 05, 2017 @01:15AM
(#14700097)
There's this company called Cisco that makes routers with serial ports.
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by SwellJoe on Wednesday July 05, 2017 @01:32AM
(#14700136)
Never heard of'em.
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by wang_li on Wednesday July 05, 2017 @01:01PM
(#14704112)
>it's been almost that long since you could buy a system with an RS232 interface at all (aside from maybe embedded systems that haven't been updated in years).
I don't know what kind of computers you are buying, but I've yet to see a retail, server-class, motherboard without a 9-pin serial port in the back.
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by SwellJoe on Wednesday July 05, 2017 @04:34PM
(#14705879)
My colo has a crash cart with keyboard/video/mouse. I don't know what I'd get out of using the serial port for anything. I think only one of my servers actually has an RS232 port, but I haven't actually looked at the hardware in over a year.
But, maybe most servers do still have RS232.
Nonetheless, rlogin/rcp/etc. are not useful tools for a serial console. I don't even know how you'd use them in such a circumstance. Are you using rlogin/rsh/rcp/rwhatever over RS232 to your servers? How? Why?
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by wang_li on Thursday July 06, 2017 @07:33PM
(#14714833)
Well, in the past we'd use multi-port serial terminal servers and all the hosts had their serial ports as their console hardwired to the terminal server. These days the servers all include IPMI with KVM redirection. But the serial ports are still there.
As far as using any TCP/IP based protocols over the serial port, I suppose you could do something silly with SLIP or PPP, but honestly I don't know why. The whole point of the serial port is that it's damned simple and firmware can easily initialize it and use it for IO extremely early in the boot process.
Re:FreeBSD deprecates all r-cmds (rcp, rlogin, etc.)
by yellowapple on Wednesday July 05, 2017 @11:09AM
(#14702976)
I personally use RS232 quite regularly in order to hook into the console ports on Cisco hardware and some servers. Really handy if, say, SSH is disabled on a router and you need to get in to enable it.
Also, it's been ~15 years since I used an RS232 interface (for serial interfaces to servers/routers); it's been almost that long since you could buy a system with an RS232 interface at all (aside from maybe embedded systems that haven't been updated in years). And, I've never used a USB port for a terminal connection; I guess it is possible but is it ever done?
But, really, why have something that's so out of the ordinary in a default installation?