News for hackers. Stuff that matters.
Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by bfu on Tuesday June 27, 2017 @08:55AM (#14644905)
Instead of measuring soil moisture try:

    - measuring air moisture of small upside down cup on top of the soil 
    - measuring weight of the whole pot
Or don't measure at all and instead use precise amount of water on precise times (RTC module, medical grade piezo-electric pump). My similar project is on hold at 20 or so sketches of various types of water pumps.
Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by rwmj on Tuesday June 27, 2017 @09:34AM (#14645215)
Wouldn't the weight of the pot increase as the plant grows (because it's absorbing carbon from the air in fact).
Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by jbeales on Tuesday June 27, 2017 @10:28AM (#14645663)
This could be accounted for - for example, if the weight of everything drops by 100 grams, then at least 100 grams of water has been used or evaporated. Eventually any increase in weight from the plant could probably be calculated, but for many plants, (like bush beans), it's a relatively small amount, probably less than a pound.

OTOH indeterminate tomato plant, for example, weighs a lot, and the weight would also be affected by picking the fruit.

Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by criddell on Tuesday June 27, 2017 @10:42AM (#14645796)
I wonder if you could use the camera to detect when the plant needs water? I have a plant on my desk that I dump water into whenever it starts looking sad and it's been alive for years now.
Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by Diederich on Tuesday June 27, 2017 @11:05AM (#14646032)
> I have a plant on my desk that I dump water into whenever it starts looking sad and it's been alive for years now.

I've grown some glorious plants on my desk at work with exactly that method. When the ends get a little droopy, I water them heavily.

Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by cbanek on Tuesday June 27, 2017 @11:05PM (#14651424)
How would measuring the weight account for the plant growing in size and weight?

You can also use a peristaltic pump for accurate watering and adding in nutrients, or adjusting pH. Sparkfun even has a kit (https://www.sparkfun.com/products/12915) for its automated bartender.

Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by kpil on Tuesday June 27, 2017 @12:54PM (#14647043)
Wouldn't two temperature sensors tell a bigger difference for wet soil, as the wick temperature is lower in damp soil. If it's little difference it's probably dry.

That's at least partially how my finger works as a sensor. A finger test probably picks up sponginess too.

Re:Show HN: GreenPiThumb – A Raspberry Pi Gardening Bot by hvidgaard on Tuesday June 27, 2017 @09:14AM (#14645043)
> Or don't measure at all and instead use precise amount of water on precise times

This may or may not work depending on location of the plant. If it's in changing temperaturs and direct sunlight, there will be periods where it needs more water.