News for hackers. Stuff that matters.
Re:IBM Claims 5nm Nanosheet Breakthrough by ttul on Tuesday June 06, 2017 @10:06AM (#14497284)
Queue extreme UV lithography. Where the light source costs $100M, took 8,000 engineers 20 years to develop, and consumes 1MW of power to shine a 1kW beam.

https://www.google.ca/amp/spectrum.ieee.org/semiconductors/d...

Re:IBM Claims 5nm Nanosheet Breakthrough by kitd on Tuesday June 06, 2017 @10:22AM (#14497388)
From the Ars article a couple of days ago [1], it sounds like EUV improvements are actually at the core of the work announced here.

[1] https://arstechnica.co.uk/gadgets/2017/06/ibm-5nm-chip/

Re:IBM Claims 5nm Nanosheet Breakthrough by ZenoArrow on Tuesday June 06, 2017 @10:36AM (#14497512)
Re:IBM Claims 5nm Nanosheet Breakthrough by arcanus on Tuesday June 06, 2017 @10:17AM (#14497352)
At this point isn't this basically a fab attached to a particle accelerator?
Re:IBM Claims 5nm Nanosheet Breakthrough by the8472 on Tuesday June 06, 2017 @10:26AM (#14497423)
This uses tin plasma generated by laser pulses. No particle accelerators involved. One could build an EUV source based on a free electron laser too, which involves a particle accelerator, but I assume that has some limitations that make it less suitable for lithography.
Re:IBM Claims 5nm Nanosheet Breakthrough by macawfish on Tuesday June 06, 2017 @10:54AM (#14497669)
Have you heard of Rayton Solar? They are supposedly slicing nanometer thin silicon with a particle accelerator. I don't know how hard it'd be to extend this to lithography though...

Bill Nye the Science Guy is their PR person: https://www.youtube.com/watch?v=JA8fKlfcA7E

Re:IBM Claims 5nm Nanosheet Breakthrough by verandaguys_alt on Tuesday June 06, 2017 @10:16AM (#14497342)
Progress has to begin somewhere. In another 10 years, this kind of lithography will likely have evolved into something much more viable.
Re:IBM Claims 5nm Nanosheet Breakthrough by Tuna-Fish on Tuesday June 06, 2017 @11:14AM (#14497844)
The problem is that EUV was originally expected in 2007. It is already more than a decade late, and it still has issues.
Re:IBM Claims 5nm Nanosheet Breakthrough by altcognito on Tuesday June 06, 2017 @10:37AM (#14497523)
If it is a short burst, perhaps 1MW is not a big deal?
Re:IBM Claims 5nm Nanosheet Breakthrough by irixusr on Tuesday June 06, 2017 @11:11AM (#14497820)
You can use a bank of capacitors and the power itself is not a huge deal (still not trivial, but it's been done for 60+ years).

The problem is also that at 1kW for every 1Mw you still only use 0.1% of the energy you pumped in. And the energy requirements are still large because you are firing this thing repeatedly. Assuming the same amount of energy is required to ablate the atoms as with conventional UV (I'm not in the field, but its probably not a bad assumption), you have to multiply the ratio of the efficiencies of both methods to get at the energy required. Could be several multiples more if not an order of magnitude.

Also where does the remaining 999kW go? Eventually heat, so you have to spend 2Mw more to cool it (assuming 50% AC efficiency, I guess you could pump cold water instead). Add in the energy costs of opening and closing a vacuum lock and this is a fun project to be working on :D