Re:Tutorial: Ordering EAGLE Designed Circuit Boards
by suraj on Tuesday June 15, 2010 @12:19AM
(#1431782)
SMD's are easy if you have tweezers, a magnifying glass and clean soldering iron. Take a look at this link http://www.infidigm.net/articles/solder/
Re:Tutorial: Ordering EAGLE Designed Circuit Boards
by cfinger on Tuesday June 15, 2010 @12:27AM
(#1431798)
Back in the day I built a couple using sharpie and the radio shack etching solution. I did two using the laser printer transfer method as well. After doing a double sided board, it drove me nuts- you have to solder small wires for your vias. Once you order boards once you'll never go back- it just solves so many headaches and possible mess ups. Give it a try!
I guess once you've monkeyed with that a while you might want to step up to something like this. It always seemed expensive and slow to me but I guess if you want to use little surface mount stuff you'd have to.
Seems like soldering it all together once you get the boards is the hard part in that scenario though.