And reliability. Making driver electronics that will live long term is not that simple, sudden stops and overload conditions are tricky to deal with in an effective way without risk to the attached electronics.
> They know a step was performed. If not, you can act on it.
Servo's don't 'step', current is applied to the motor in a continuously varying manner and the delta between the desired movement and the observed movement determines how that current will change over time.
This leads to all kinds of nasty side effects: overshoot, undershoot, runaway in case of a failing feedback mechanism and so on. Steppers are much simpler to interface to in principle (but to drive them at speed is remarkably hard due to all kinds of resonance issues) but much harder to get performance and reliability out of, almost all larger scale industrial control is done with servo motors tightly coupled to their driver electronics.
Edit: as other point out 'controlled' is not the best word here. Maybe 'positioned' would have been better.
There is no reference based on a 'step' or a 'pulse', there is only the desired position and the actual position and the difference between the two can be quite large, much larger than with a stepper which can by definition be at most one step ahead or behind or it is game over.
This gets very interesting once you start to combine servos on multiple axis and you want to limit your maximum error compared to some desired trajectory.
But I totaly agree with you, they are completely different. Maybe in this case it was not very clever to oversimplify the problem.
By the way: you point out what I think is great about this business. So much work has been done to control motors very accurate. It's amazing what CNC machines can do today. And also how software optimized motion paths (gcode). And now this hardware. Great stuff!
(Unless you are referring to block commutation of the BLDC phases, which can look sort of similar to step wise control, but I would rebut that in precision servos drives, we would also look at doing non stepwise commutation (sinusoidal, FOC, etc.))
There are two things that matter: accuracy and repeatability. Most of the time accuracy is not a problem. But repeatability is. For example when you move something heavy a motor can loose a step. When you don't know this the rest of the accurate moves are out of control.
That's why industrial controllers have good feedback systems. They know a step was performed. If not, you can act on it.
So it's more about control than about motors. But cheap motors wear out faster.