In CPU-Z I am getting something different from the seller's published CPU-Z screenshot - it's showing stepping "R2" ("retail"?) - however the name string is also still showing as "ES".
I've attached a dump from CPU-Z that shows CPUID 0x0 and 0x1 values. From the processor value (0x000306F2) and the Intel data I could dig up - it would appear that this is actually the SR1Y1 stepping. Which is apparently the M1 stepping. Possibly actually a QS rather than ES.
https://www.intel.com/content/dam/www/public/us/en/documents...
Not holding out hope overall given that it was sold as the M0 stepping but I guess you never know, maybe I got lucky. There was no pic on the eBay auction, and I would have to pull the cooler back off to check what's printed on the processor itself.
1. A lot of Intel consumer platforms (which Ryzen is) had early issues with DDR4 on Z170; there's lots of forum posts about that.
2. AMD said it was not going to be validating ECC for consumer processors.
3. Haswell-E you're referencing officially only supports up to DDR4 2133Mhz memory. Depending on your configuration Ryzen officially supports more (2666, 4000)
4. You're comparing a $1200 chip to $500 chip at retail.
5. You're comparing the TDP on processor running at 1 to 1.5GHz more.
6. ES samples tend to run at lower clock speed then official final processors with hopefully lower temperature as well.
This just isn't remotely an apples to apples comparison. I'm curious what the comparison will look like once there's HPED AM4 chips.
On the flip side I personally would not trust a ES chip personally. The chips are know to contain unfixed errata addressed in further versions of the silicone and a lot of motherboard do not contain microcode updates for those.