Re:Arduino board adds Sigfox low power wireless for IoT
by jbmorgado on Tuesday April 18, 2017 @05:54PM
(#14143324)
I see, thank you for the thorough explanation. Also because my first guess would be to turn on an off the antena whenever I needed data, but after what you described I see that's not as straightforward and depending on the number of updates it may actually be better to leave it on for longer periods of time.
Re:Arduino board adds Sigfox low power wireless for IoT
by extra88 on Tuesday April 18, 2017 @06:07PM
(#14143439)
I'm really ignorant about radio and even electricity so don't let my googling and wild-ass guesses scare you off. There are many helpful "maker" fora populated by people who can provide educated advice.
Re:Arduino board adds Sigfox low power wireless for IoT
by nicolsc on Wednesday April 19, 2017 @04:43AM
(#14146363)
Sigfox, Wifi, or else, my recommendation is the same : when you have nothing to say, do nothing :)
In most "connected" devices, you don't need to keep an established connection which will drain the battery fast.
This is why idle consumption is key, as it will often be the state of the solution 99.x% of the time
Simply turn the communication module on when you need it.
Then the difference between solutions consumption-wise will be on time needed to establish connection if any, time & power to send your data.
I'm having trouble finding the same details about the MKRFOX1200 but for the transmitter "Low current consumption: 32.7mA during telegram transmit [...] Typical OFF mode current: 5nA." [1] The processor part is a SAMD21.
My guess is it's possible to get comparable idle/sleep power draw regardless of transmission method but WiFi will require more power to establish a connection and transmit the first byte.
[0] https://cdn-shop.adafruit.com/datasheets/ESP8266_Specificati...
[1] http://www.atmel.com/Images/Atmel-9372-Smart-RF-ATA8520_Data...