Thanks, I didn't realise these exist.
I've been wanting to create a DIY version of Synology's "slim" model line [1] for a while, but haven't been able to find an off-the-shelf enclosure that would fit my needs. Putting six drives in a 5.25" bay is a fantastic idea.
I'm not sure if an ARM chipset would do justice for a multi-disk NAS setup though (or if the GnuBee would support RAID5/6 — it does seem to, with LVM/mdadm). My experience with consumer ARM-based NASes was that they suffered on transfer speed. I ended up going with a 4th generation Intel Pentium chip on a mini-ITX board, which offered the best compromise between price, performance, and power consumption for my use case.
What are your thoughts about Btrfs?
[1] http://www.silverstonetek.com/product.php?pid=668&area=en
I think these are the Toshiba drives. Seems like 2TB is still as big as you can go on laptop form factor spinning drives.
Seagate has 4TB drives now (and I think they're still shuckable), but they're 15mm in height.
I read somewhere on Reddit's r/DataHoarder that they might be moving away from a SATA connector on their portable drives though…
Loving it!
Now, my storage needs are fairly modest in comparison to the author. I'm running with RAID-Z2 and at 44% capacity. I have this unit in my work workstation, at an external office. It is quiet and cool.
I used to have a big house with a room I could put a bunch of computers in. I moved to a smaller house, but more importantly I was just tired of managing a business-class infrastructure at home (VLANs, multiple APs, UPSs, batteries, patch panel, servers, etc).
So I copied a backup of my storage server from an off-site box, to S3 with Glacier, copied the primary to this ZFS array on my workstation, removed junk I was just holding on to, and now my home infrastructure consists of a Cable Modem and Google WiFi mesh. Huge improvement in maintenance!
Here's a blog post I wrote about one of the previous incarnations: https://www.tummy.com/articles/ultimatestorage2008/