Re:Show HN: Is It Snappy? – Measure latency with your iPhone...
by photojosh on Monday April 03, 2017 @09:38PM
(#14028860)
At least on recent iPhones, the front-facing camera does not have IR filtering, but the back one does.
Source: I use the front camera to debug one of our products, which uses IR LEDs as a flash to check for obstructions.
Re:Show HN: Is It Snappy? – Measure latency with your iPhone...
by problems on Monday April 03, 2017 @03:34PM
(#14026304)
I thought most phones had IR filters these days and that this wouldn't work? Am I incorrect here?
Re:Show HN: Is It Snappy? – Measure latency with your iPhone...
by cuonic on Monday April 03, 2017 @03:49PM
(#14026450)
They have basic IR "filters" which are used to reduce IR light, but they don't totally block it, which is why you can see a purple light coming from TV remotes and such [0]
0: http://www.wikihow.com/images/6/60/Check-if-a-Remote-Control...
Re:Show HN: Is It Snappy? – Measure latency with your iPhone...
by IanCal on Monday April 03, 2017 @03:46PM
(#14026424)
I just checked mine now, new Moto Play Z so pretty recent, and it's much less noticable than it used to be. However, going into a dark spot so nothing else could be seen, the led in the remote flashed a slight purple. Definitely enough to check it's working, but you need a bit more cover around it to be able to see it. In the past, they used to flash like bright bulbs.
The otherwise non visible IR led in the remote lights up when viewed via a phone camera, as you press buttons on the remote.
Handy if you suspect the remote is broken, but aren't sure.