690 V is industrial (this the logical progression dictated by star-delta connection of motors), and not used in residential contexts. 125 A CEE is the largest standard size. Beyond that other connectors are used. Industrial use also sees other connectors / kinds of connections for higher voltages (up to medium voltage [couple kV]).
As far as I can see it's either colo or run a 220V circuit, which is a bit of a non-starter for a hobby project.
Heck, you can even get uncomfortably close to maxing out a circuit with a single box. SLI 1080 Tis = 540W, plus 250W for an OC'd Intel HEDT processor is 800 watts inside the box, or 1000W at the wall (8.25A of 12A continuous). Hope your wife doesn't start the hairdryer while you're gaming...
This all works because you have between one and three 400V/63A triphase circuits per housing unit, but if your US circuits are this tiny...
As a line might be hardwired to multiple sockets, or to an appliance, or might be connected via a CEE plug instead of Schuko, it might support more than 16A.
If you build a large-scale GPU Cluster, you won’t connect them all to a single socket, but each to a separate socket, although they might be on the same line. That’s where the 25A can be useful.
Actually, in Europe, you get 220V/25A from normal wall sockets, or, for stuff like washing machines or stoves, you get up to 400V/63A.
With that – roughly 3.5kW from a normal socket, or 25kW if you use a socket for a large appliance, compared to the 1.4kW available in the US – you can easily power a fuckton more.