It's open source, here's the PRU code: https://github.com/BelaPlatform/Bela/blob/master/pru_rtaudio...
This paper describes the platform in more detail: http://www.eecs.qmul.ac.uk/~andrewm/mcpherson_aes2015.pdf
This paper compares latency achievements using this strategy compared to Raspberry Pi, Arduino, Max/MSP, etc: https://qmro.qmul.ac.uk/xmlui/bitstream/handle/123456789/124...
Here's an excerpt:
"Bela uses both the McASP and the PRU. The McASP actually streams the data to the codec, but the PRU handles passing data to and from it, as a sort of sophisticated DMA controller. We use the PRU here because it can also do SPI transactions with the other ADC and DAC and it can sample the GPIOs, all aligned on a sample-by-sample basis with the audio clock. The PRU then puts the results in a memory buffer for the CPU to work with.
To take any advantage of that, you need a Xenomai kernel, because this lets you write audio code that can interrupt the entire rest of the OS. If you don't have this, then you're stuck with the timing uncertainty that regular Linux provides, meaning you need larger buffer sizes (= longer latency). It also means that audio performance may depend on system load, which is not true of Xenomai (rather the reverse: rest-of-system performance depends on audio load)."
Can any of this feed into the TSN(Time sensitive networking)/AVB(audio video bridging) standards?
I haven't found anything useful in that space.
Allwinner SoCs have an OpenRISC microcontroller used for managing deep sleep modes. [0]
I don't think anyone has figured out how to use it for other tasks yet, but it would be really great if there were more SoCs that included these kind of companion cores.
Related, the lowRisc RISC-V project has a concept of minion cores: http://www.lowrisc.org/docs/memo-2014-001-tagged-memory-and-...
http://www.nxp.com/products/microcontrollers-and-processors/...
They really pissed us off with that crap, and our shop at least probably won't be buying NXP parts for a while.
Because the vendor should provide an SDK for development?
It's fine if the vendor's image is based on Yocto, but you should still be able to download something from them with instructions.
That's literally what Yocto builds for you.
you should still be able to download something from them with instructions.
As an example, here's Freescale/NXP's github with their Yocto recipes. It was not "nuked from orbit" on the purchase.
https://github.com/Freescale/fsl-community-bsp-platform
And a sample build guide:
http://www.nxp.com/assets/documents/data/en/release-notes/IM...
This is something I plan to do once I get one of these beasts, although they're probably beyond my level of comprehension. Anyway, if they can be used to synthesize signals at very high speed, what about using them to build a DVB-T transmitter? When TV went digital we lost the ability to send a signal to a TV using an extremely cheap modulator, and last time I checked the only units around are priced several hundred quids, so if doable an application like that one could be truly interesting.
Not possible, unfortunately.
IIRC The PRUs run at 200MHz. I'm not an expert at signal magic, but unless somebody has a really smart trick up their sleeve, it means you can synthesize at most a 100MHz signal (assuming changing the state of an output takes only one cycle, which I believe it does).
I've been looking at boards for days now trying to find the perfect one to suit my needs and this is exactly what I've been looking for. I've seen the beagleboard before but I never noticed this feature before. I'm glad I saw this post this morning!
I've actually got a Beaglebone Black sitting on the desk next to me. I haven't gotten around to playing with the PRUs, but I know of their existence and general capabilities.
http://www.cnx-software.com/2014/06/18/bluesteel-basic-beagl...
The interesting part of this one, to me, is the Octavo packaging of the AM335X processor with on-die RAM. That makes the board much simpler. Though, I thought it would make a bigger difference in price. The BeagleBone wireless that uses the same chip is ~$68, which is $7 higher than the Black that has separate RAM.
If you haven't used a BB product, check out the thing that I think is the biggest upside of these...the built in pair of PRUs. It's like having the best of a normal linux board plus a microcontroller on the same board. Since the PRU shares memory with the main CPU, you can offload things that need to be realtime. That allows for things like a near professional-level LED matrix controller (https://trmm.net/LEDscape) or even a DIY video controller (https://trmm.net/Mac-SE_video).