News for hackers. Stuff that matters.
Re:A $10K tiny house 3D-printed in 24 hours by Animats on Monday March 06, 2017 @01:17AM (#13801006)
The basic limitation is how wide a load you can move by road and rail. That usually limits you to a double-wide house.

There's panelized construction, which is like IKEA for houses. This works reasonably well for rectangular houses. The joints can be a weak point, both structurally and as leak points.[1] Plumbing, wiring, and interior walls are best done at the factory, but that makes the connections complicated.

If you're willing to have exposed bolts and joints, it's easier. Butler Buildings makes industrial buildings and barns from prefab panels of corrugated steel. Those buildings are everywhere in rural America. They're strong, they go up fast, they can be purchased with insulated panels, and they last a long time. You can even get a fake brick exterior and a nice interior. But the result will look industrial.

[1] http://www.huduser.gov/portal/Publications/PDF/path_panel_co...

Re:A $10K tiny house 3D-printed in 24 hours by dragonwriter on Monday March 06, 2017 @12:50PM (#13804450)
> The basic limitation is how wide a load you can move by road and rail. That usually limits you to a double-wide house

It limits the size of the individual module, but I've seen an entire multistory, city-block-size apartment complex built up from trucked in modules; limiting the size of the prefabricated modules doesn't meaningfully limit the size of the final building.

Re:A $10K tiny house 3D-printed in 24 hours by tonyarkles on Monday March 06, 2017 @03:21PM (#13805732)
It's amazing to watch! There was a row of townhouses like that put up near my old house. They had a crane and a steady stream of trucks bringing in the modules. Truck shows up, two guys put straps around the module and hook it to the crane. When I was watching, they were on the second storey, so there were two guys on the roof that helped the crane operator drop them in place. Take the straps off, throw them down to the ground, and repeat.

Pretty incredible watching the entire storey of a block worth of townhouses being assembled in an afternoon.