News for hackers. Stuff that matters.
Re:What Vizio was doing behind the TV screen by voltagex_ on Monday February 06, 2017 @09:53PM (#13586581)
I know we can't expect the "average" consumer to do this, but thanks for caring and running tcpdump on your network! It amazes me that with a lot of these stories there's no one popping up with a pcap showing exactly what's going on.

I'm hoping projects like Turris Omnia [1] will allow people to be more in control of what goes in and out of the LAN - my network, my rules.

1: https://omnia.turris.cz/en/

Re:What Vizio was doing behind the TV screen by ktta on Tuesday February 07, 2017 @03:44AM (#13588043)
You don't really need a open source router. Just something that can be flashed with Openwrt or dd-wrt. The router you linked actually runs a fork of Openwrt.

https://openwrt.org/

Re:What Vizio was doing behind the TV screen by voltagex_ on Tuesday February 07, 2017 @04:34AM (#13588232)
Yeah, they're pretty rare in Australia due to our reliance on ADSL - unless you flash with DD-WRT. It's still not something everyone does. OpenWRT and DD-WRT's UIs are pretty rough (although, most commercial UIs are, too)
Re:What Vizio was doing behind the TV screen by cybergoat on Tuesday February 07, 2017 @08:09AM (#13589083)
I'm running OpenWRT on a TP-Link TL-WR841N/ND v8 and the LuCI interface that comes out of box is vastly better (cleaner and more feature-full) than the majority of consumer router interfaces I've encountered. In particular, the realtime graph of current connections!

You can likely set your ADSL modem into "bridge mode" and put a user-flashable device between that and your network. Once you get NBN you just connect the WAN port to the NBN termination box and you'll be getting DHCP from your ISP.

Re:What Vizio was doing behind the TV screen by voltagex_ on Tuesday February 07, 2017 @03:53PM (#13592687)
I'm on the NBN now. Configuring OpenWRT had been a pretty steep learning curve but it's worth it in the end.