These two statements contradict each other. There is not much difference in resolution between 24MP and 50MP (4.9 : 7), so if I was getting ~50MP of resolution in my 4x5 negatives, you wouldn't expect to see a big difference, even if I was doing everything right.
>Moreover, if you do a 'DSLR' scan of the negative, you can get quite a bit more detail.
This is in fact what I do (using a very sharp pre-AI 55mm Micro Nikkor). I do get benefits from stitching multiple 24MP "scans", but this is because there is always some resolution loss in scanning. So, sure, I might end up with a 100MP file, but I find that I can typically reduce that down to around 30-40MP without losing any detail.
Do you have an example of a 100MP scan of a 4x5 negative that loses detail when reduced to, say, 50MP?
Moreover, if you do a 'DSLR' scan of the negative, you can get quite a bit more detail. I'd say 100MP of "really actually noticeable and useful" resolution. https://petapixel.com/2012/12/23/why-you-should-digitize-you...
The reasons to use large format, as I see it, are as follows:
* Lens choice. There's a wealth of options here that you simply don't get with smaller formats
* Movements. The mild DoF hit is easy to accept when you have complete control over the focal plane, as well as the distortion control
* Film. Digital PP still isn't quite up to replicating the chemistry. Someone good, and with a significant effort, can get really close, but it's not quite the same.