News for hackers. Stuff that matters.
Re:Homemade 16TB NAS - BlackDwarf by sandGorgon on Friday May 07, 2010 @08:00AM (#1327302)
Next time do try ZFS on Fuse (linux userspace filesystem) - I have a 1TB setup and it works quite well.

You could try making a RAIDZ volume and see how it goes.

Re:Homemade 16TB NAS - BlackDwarf by pielud on Friday May 07, 2010 @08:53AM (#1327405)
Have you had good luck with this? I'm running zfs on an open solaris server, but I hate solaris and would like to switch to linux. I never got the impression that zfs on fuse was stable enough to trust with all of my data.
Re:Homemade 16TB NAS - BlackDwarf by barrkel on Friday May 07, 2010 @12:30PM (#1327995)
I use Nexenta (my ZFS build is described here: http://news.ycombinator.com/item?id=794640 and here: http://blog.barrkel.com/2009/03/zfssolaris-as-nas.html). The nice thing about Nexenta is that it's an Debian/Ubuntu-style userland (the default install is console only I think, but that's the way I like it).
Re:Homemade 16TB NAS - BlackDwarf by chronomex on Friday May 07, 2010 @12:06PM (#1327916)
I put my homedir under zfs-fuse for a while. When I migrated to jfs-on-raid5 (3x160G) some months later, a small but nontrivial fraction of my symlinks had turned into 0-length files with 0000 permissions. Various things sort of randomly broke, which was interesting. (Mostly unimportant things, such as ssh not being able to read authorized_keys.)
Re:Homemade 16TB NAS - BlackDwarf by enneff on Friday May 07, 2010 @09:42AM (#1327519)
I use ZFS under FreeBSD 8-RELEASE in a 6x1.5tb raidz2 (dual-parity) and it is rock solid. The benefit of running ZFS under FreeBSD over Linux is that you don't need to use FUSE, as ZFS has been really well integrated with FreeBSD's filesystem layer.
Re:Homemade 16TB NAS - BlackDwarf by silasb on Friday May 07, 2010 @10:37AM (#1327688)
Would you mind writing up a tutorial. I am interesting in ZFS under FreeBSD, I have 8-Release downloaded and ready to go. Still working on getting the hardware up and running for it though.

Are you using 64-bit? I heard ZFS loves 64-bit.

Re:Homemade 16TB NAS - BlackDwarf by StarLite on Friday May 07, 2010 @10:36AM (#1327685)
The problem wasn't really the filesystem I think. The card actualyl threw the disks out of the array and then refused to put them back in somehow.
Re:Homemade 16TB NAS - BlackDwarf by Kadin on Friday May 07, 2010 @12:27PM (#1327983)
Were you doing the RAID using the card's drivers (BIOS softraid/fakeraid), or using regular software RAID?

It seems odd that the controller would drop drives like that, but I would never trust the "RAID" features of low-end interface cards ... they're barely competent at exposing the drives as bare block devices to the OS as it is.

I've had decent enough luck with the real hardware-RAID cards from Dell, but they are expensive and if I were building a new server today, given the price of CPU cores, I'm not sure it would be at all worth the cost and SPOF risk. I've never had a card fail but if it did, that would suck. Back in the SCSI/PentiumII era they were fairly nice though -- I have a PERC still running in a closet, doing RAID5 across 5 74GB SCSIs. Probably about time to pull the plug on it though ... those five drives probably burn through their replacement cost in electricity every few months.

Re:Homemade 16TB NAS - BlackDwarf by dalore on Friday May 07, 2010 @01:56PM (#1328240)
You should look at using software RAID. The performance is not as bad as it once was. Plus you don't get a corrupt controller which tend to be proprietary.