http://www.thestrad.com/blind-tested-soloists-unable-to-tell...
"Soloists readily distinguished instruments they liked from those they did not but were unable to tell old from new at better than chance levels,’ the report concluded. ‘Given the stature and experience of our soloists, continuing claims for the existence of playing qualities unique to old Italian violins are strongly in need of empirical support."
She says you can ALWAYS tell the difference. But she also says, "better" depends on the music. If you are playing a song on X-Factor or Australian Idol or even Christmas carols, then you'll never notice. If you are playing a solo for a classical piece (wedding or other ceremony), then it certainly sounds "different".
Better is debatable, but different, yes
I'd imagine if 5 of the best sawyers with 5 of the best luthiers and sound engineers in the world all sat down together with the goal of replicating the Strad's sound with 100% accuracy I'm confident the 'unique' sound of the Strad could be replicated. It might take a lot of time and maybe a few hundred k in equipment (a dozen condenser mics placed strategically at a variety of places within the room and near the instrument itself, some vibration analysis equipment on the equipment, etc), but eventually the sawyer will choose the right wood, the engineer would perform acoustic analysis and tell the luthier "ok, that 43 micron chisel shave you just took just did __, 22 more and we match the F# perfectly on the G string".
I think it's very similar to the whole audiophile thing, where at least some of it is placebo. Those $30 monster cables aren't transmitting with any more signal fidelity than your $5 ones (assuming equal gauge copper, proper ohmic termination, blah blah), and I can sit down and prove it to anyone with $400 worth of spec-ans from the 1980s.
Now the "different" vs "better" -- I love my record player but when audiophiles say 'it sounds better' than the raw mix-down digital masters, in terms of the amount of audible audio content objectively this isn't the case. (Edit: See [4]) It sounds different from what you're used to. You like the 'warmth' that a belt drive record through a 1950s speaker produces. You like the hisses and crackles and pops. It's an emotional connection you have. When I was playing guitar with my crappy band, I'd run my digital content through a Tascam quarter inch tape deck just to get that hiss in the tracks before we sent it down for mastering (we didn't have those fancy plug-ins to do it for us then).
The same thing happened with film.[2] TV is generally shot at 30fps, film at 24fps[3]. When the FPS rate increased with the advent of more modern technology and higher sampling rates, people would claim that cinema didn't look 'cinematic'. The motion blur of the analog film experience we grew up with (well, those of us over 25) is something we mentally associated with the experience of going to the cinema. You saw a bunch of people comment on this with the Hobbit being distributed and shown at theatres at 48 FPS. "It just doesn't look right".
--
[1]http://www.thestrad.com/blind-tested-soloists-unable-to-tell...
[2] I'm sorry I don't have a source on this study, but the phenomenon was pretty widespread. Cinema isn't something I've delved too far into but the cinematographer forums have thousands (literally) of threads on FPS discussion.
[3] That's just historically how things broke down -- 24 was a convenient number to match up with actual seconds due to it's easy factorability, so you could get half a second at 12 frames, a quarter at 6, etc. This made it easy back in the day when post-processing involved actually involving cutting nitrate-based film and sound syncing to the video involved physically matching the snap of the clapper on your audio track to the visual of the actual frame of when the hinge closed.
RE: 30 fps, I'm not sure, but I'd guess it had to do with the fact that we're at 60 hertz in the US so you could interlace half a frame a cycle (ie. trigger on the peak of every AC cycle to update the set of horizontal lines modulo two, so the electron gun presumably only had to hit half the lines within that time constraint) Other parts of the world operate at 50hz, which is why I'd imagine you have the PAL standard and 25 fps in those locales. (Pure speculation though, someone who's knows for sure, jump in.)
[4] Operating under the assumption that that they were pressed from the same master source.. I'm limited only to the records I bought which were from bands with too small of a budget to afford two separate masters. (I.e., That mid-90s emo 200 run EP by Knapsack didn't have two masters, hell on tour they were lucky to have a floor to crash on.) Still, poster beneath me makes a very valid point that should be taken into consideration (Though I'm sure you're already aware of whether or not the band had a separate master DAT/master plate made if you like the band enough to care about the nuanced differences between two masters.)
There is a case to be made that CERTAIN albums will produce an objectively better sound in several respects when compared to the CD/digital version of the master. This is an effect of the "Loudness Wars" that began in the late 80's and still continues, albeit at a lower intensity, today.
The analog nature of the vinyl format places a hard limit on how "hot" one could make the sound by tweaking/compressing the dynamic range. Eventually the mastering would exceed the physical ability of the needle to track the groove which is obviously untenable for everyone involved. CD's on the other hand, can push the range as far as acoustically possible and people who want their new rock album to really ROCK are going to be more impressed by a master that somehow sounds louder than any other album at a given volume setting. Thus, the Loudness Wars began and have progressed to the point where the dynamic range has been pushed into the realm of guaranteed acoustic clipping because it still sounds louder and the loss of fidelity won't matter when the song is blasted from an iPhone speaker.
Obviously, this is an effect limited to specific albums. Even if you buy one a pressing of one of these albums, you aren't guaranteed better sound as the vinyl boom has led to some really half-ass remasters that can be as half-assed as passing the borked digital master through conversion software to ensure it works without making any further effort.
Aside from this one outlier scenario, a song/album/whatever mastered attentively to the CD format will always deliver objectively better sound quality.
Source: http://www.soundmattersblog.com/vinyl-vs-cd-in-the-loudness-...
Fortunately, the shift from CDs to digital as primary target has brought an end to the Loudness War. The various services have standards for perceived loudness, so there's no incentive for the mastering engineer to squeeze a few extra decibels out of the mix - past a certain point you're accomplishing nothing but killing your headroom margin.
Indeed, the behavior of violins has been the subject of intensive study for decades. Every new technique for measuring sound or vibration is applied to violins. There's an article every few years about some new secret discovered in the great fiddles. Good acoustic measurement gear is now more sensitive than human hearing. It was only a matter of time before somebody cracked the code.
An amusing rumor is that the tone of a violin changes over time, due to age and playing, and that the Strads are in decline.
The same thing is true for the fingerboard, the bridge, the strings and other components you interface with (or are interfaced with from things with which you interface) on your violin. As the oils on your finger on the strings/fingerboard gradually acts as basically a mini-abrasive tool, the fingerboard itself will change shape (you can see this easily in the wear patterns). The pressure variance from the string's depression, the shifts in temperature/humidity in the ambient environment (which will stress the wood in all sorts of ways, both in an elastic (temporary) as well as a plastic (permanent) manner), all of these micro-variables add up over time, just like with your car.
I've read quite a bit about the blind violin studies, and don't see a way to dismiss it -- people were claiming instantly recognizable, impossible-to-miss massive differences in quality for the older violins. Yet nobody has been able to back up those claims with results; all results so far indicate that when the age and maker are obscured, identification by sound alone is no better than chance.
> Also known as ...
Please. What I've just written makes the rest of that sentence silly. There is no need to jump to conclusions.
Funny enough two comments I made - on this thread, now dead - went from +2 to -4 very quickly. Another comment went from +5 to +2.
I've got a pretty strong feeling that people love telling this anecdote about "science over art!" and ironically don't like it when it turns out the science is actually bad science. As a result, they're banding together and simply mass-downvoting things.
There's an interesting debate to be had here, on the merits of the sounds of different instruments, and the linked NYT article is fascinating. Unfortunately, people seem to be caught up in a frenzy of linking bad science to each other instead of actually discussing violins, which are a personal passion of mine.
I went into more detail on the bad science in my other comment here, which is going negative now: https://news.ycombinator.com/item?id=13233977
But the simple fact is that the die-hards are going to, well, die hard. The result with violins is not at all suspect; it's very much in line with results from other fields where particular products are touted as easily distinguishable due to their inherently much-higher quality. See fine wines for another example.
That is not generally true. It depends on what kind of statistical assumptions you make, or statistical analysis you conduct. The term statistical power describes our chance of correctly detecting an effect when there is one to observe. If the effect is small, then a larger number of samples are required to achieve a given level of statistical power, whereas if the effect is large, then fewer are required.
I recommend that you consider the question: if 10 samples are not enough, then what specific number of samples is enough? How do you decide? Fortunately, these questions have been studied in the field of statistics.
Let me give you an example. Let's say I told you that you will flip a coin in the air, and when the coin reaches its peak height, I will shout "heads" or "tails". What would you make of it if we ran this experiment 10 times, and I correctly guessed the outcome 10 out of 10 times? Perhaps you would conclude I really can predict coin flips. By comparison, if I called the outcome accurately only 5 out of 10 times, then you'd probably consider my claim false.
But, consider these two possibilities: (1) what are the odds that my guesses are really no better than random chance, and I've just guessed 10 out of 10 correctly by good luck? (2) What if I really am accurate 99% of the time, but I guessed only 5 out of 10 correctly by bad luck? Statistics allows us to evaluate how likely these things are.
If I'm doing the math correctly, then you'd expect someone to guess 10 out of 10 coins correctly just by chance once in every ~1000 experiments. So to see this happen is not witnessing an extraordinarily improbable event; run enough experiments of 10 coin flips and you will see it.
If someone truly has 99% accuracy, then in almost every experiment they will guess 10 out of 10 correctly. They should guess all 10 correctly 90% of the time. A person who is truly 99% accurate will only guess 5 out of 10 flips correctly once every in every 10,000,000,000 experiments. So it is extraordinarily unlikely that you will see someone with 99% accuracy guessing 5 out of 10 coin flips correctly. It can still happen just by chance, but it's really improbable.
Bringing this all back to the main topic, it is possible for a result of 10 data points to count as convincing evidence against the theory that there is a strong effect, such as that musicians are 99% accurate in discerning the type of violin, while it may be inadequate to evaluate whether there is a weak but still-present effect, such as 51% accuracy. Whether the number of samples is good enough depends on how small of an effect you want to measure, and how confident you want to be in your assessment.
A free book is available online called "Statistical Inference for Everyone" which introduces these topics. https://github.com/bblais/Statistical-Inference-for-Everyone
It's also quite common for humans to think the can tell the difference but can't under test lab conditions. We see the same results in everything from wine tasting to telepathy.
lol! That is a brave statement. As @dcsommer said, sample size is tiny.
When you audition for an Opera (well, her auditions anyway...) were always done blind - ie behind a curtain or similar.
When you practice and play at that level, you notice the little things. Same way I can look at C++ source code, or Java, C#, Objective-C or Node.js. I have to stop and think to explain how I know it is C#. I just know.
Again, I didn't say one is better than an other. Just different...
There is, of course, some correlation between more expensive and better, I'm more talking about what happens once you've gotten away from the cheap mass produced instruments and even the decent but unremarkable student violins. Once you get up into a higher level, instruments may get expensive because you need a highly skilled craftsperson to bring out particular qualities in an instrument that may match up to what a musician needs. That sort of thing can't really be mass produced, and because it requires a lot of attention and construction time from a skilled person, it's expensive too.
This holds true for a lot of things. For instance, what's actually "better", dinner at the french laundry, or a damn good burrito. The burrito actually isn't cheaper because it tastes worse, it's cheaper because it isn't as expensive to produce. This actually holds for a lot of things out there.
More expensive isn't always "better", but interestingly, just because it isn't quantifiably better doesn't mean you aren't getting something for your money when you spend more, either. Sometimes more expensive means high quality and specifically tailored for a particular set of criteria.
There are an awful lot of variables, especially regarding listening conditions. And then the strings are going to be different too.
You're definitely the odd man out if you don't prefer a Strad to a modern instrument, that strikes me as an odd thing. If it's so overwhelming then there should certainly be something measurable in the audio or there would be differences due to taste and preference, right?
Equip: Famous Violin [+5% playing ability from placebo effect]
Linking to the start of that segment: https://youtu.be/eNzRHuqvMxQ?t=50m14s
Pretty cool stuff.
For a while, wanting to learn well the math for theoretical physics, I was a math grad student at Indiana University. They put me in courses beneath me and courses irrelevant to the math I wanted. For "beneath", they put me in a course in point-set topology. Maybe okay: First lecture I learned that the text was Kelley, General Topology. Heck, as an undergraduate I'd already gotten a copy and a reading course, read the thing, and gave lectures once a week to a prof. One week I explained a chapter and the next week worked exercises from that chapter. Another course was abstract algebra from Herstein's book. Gads: Group, rings, fields, vector spaces, and I'd had that as a ugrad. I asked the prof if he was going to cover group representations, and he said that was "deep". I told him it was also my ugrad honors paper. Really bad was early in a course in real analysis where the prof wanted to see me after class about my work on his first test. He treated me with contempt. The test had been on set theory, and I'd used lower case omega for the first uncountable ordinal, believed that the notation was standard (had had a summer NSF course in axiomatic set theory), was in a hurry and didn't explain the notation. So I explained. Then the prof caught on: My work was correct and, indeed, one step shorter than his solution. I asked what he wanted to see me about, and he said "nothing". Gads. I didn't want to see him again. They said Galois theory to me one too many times. So, I kept doing my teaching, mostly calculus. Gads, that was first year college calculus, and I'd never taken it but taught it to myself and started on sophomore calculus.
Then I started studying Fleming, Functions of Several Variables with the exterior algebra at the back, etc.
I liked music a LOT, still do, but didn't know much, but Indiana University had a terrific music school, and my dorm was next door. In the dorm was a violin student of Josef Gingold and a protege of Issac Stern with a letter of recommendation from from Zeno Francescatti.
Once, for fun, in a practice room, with a pianist and me listening, he sight read the Vieuxtemps Fifth violin concerto.
One afternoon in the dorm, he put his old Italian violin under my left chin and gave me a first lesson. Magic! So, I signed up for a first course, one on one, in violin! The teacher was another violin student: Poor guy, had to start out by showing me how to hold the violin, and after the semester he was soloist for the Brahms concerto in Toronto! He was good!
Eventually I made some progress: Problems: Started too late, too little talent and practice! But, violin is doable and about the most fun can have standing up -- get a voice to permit screaming out to the heavens about the passion of the human spirit!
On violins, one difference is how easy it is for the violinist to get the sound they want. That's a biggie. A listener may never know about any of that, but there's little doubt for the violinist!
Years later that violin student was a well known professional violinist. I called him for a recommendation of a violin shop for routine maintenance on my violin, and he gave me David Segal Violins in NYC who had made his then favorite violin. IIRC he said he liked the Segal violin better than any of the old Italian instruments.
So, maybe, one way and another, there are people now who know how to make some of the best violins ever.
Generally I long since gave up on taking seriously anything in the NYT. But, gee, maybe for anything they publish, someone likes it!
My favorite piece of music is the Bach Chaconne for unaccompanied violin. I made some progress with it. To me the best part is the end of the central D major section; it has a violin scream out passion beyond belief. The piece deserves more than a solo violin and has been arranged for solo piano by Busoni and also for full orchestra. A piano performance I like is
https://www.youtube.com/watch?v=sOFflFiLlT8
When my startup is farther along, maybe I'll get some maintenance on my violin and get through the rest of the Chaconne. Just need a lot of practice!
The role of the math is part of the story: No way did I go to Indiana University to learn violin! I went there, as I said, to get the math for physics. My interest was in physics and mostly still is. So, part of the story is the bumps and turns in the road that can lead one to something very different than the original goal. Part of the story is how I was well prepared for the math program but, still, didn't like it and, e.g., ended up in violin!
Such things can happen. E.g., there are some Freeman Dyson remarks about why he hates Ph.D. programs and how dangerous they can be to a student's health. Dyson is correct. For one more, there is currently a story at the James Simons Quanta Magazine about a woman who got into looking for dark matter from flashes of light in liquid Zenon gas and early in her career, from the pressures, had to learn to make herself out of titanium, learn to dry the tears, etc.
Well, I wasn't made of titanium: No way was I going to buckle down, nose to the grindstone, ear to the ground, shoulder to the wheel, make the best of the situation, etc. Heck no. I'll go start violin, get a job, and learn the math in evenings and weekends on my own -- for which I did make a lot of progress. And I met my future wife.
So, part of the story is, to heck with the titanium, and don't let the dangers Dyson was concerned about take effect; in a bad grad program, give them the middle finger and do something else.
Violin and the Bach Chaconne are a very long way from mathematical physics, but they did have a role.
It was a story, as in communication, interpretation of human experience, emotion. It was an example that maybe others can understand, compare with, and maybe draw lessons from.
A lesson: Can go for mathematical physics and end up starting violin! Can happen!
The mention that I was well prepared for all three courses they put me in, two of them knew essentially all the material and in the third was way ahead in the first lectures on set theory, don't show that I'm smart but just the outrageous incompetence of some grad programs, and that's part of the story, that is, the outrageous, unexpected bumps in the road.
For a little more, later I went to another grad program and did get a Ph.D., but this time I investigated grad programs before applying. There some data indicated that while I was at the Indiana University grad math department, only one entering grad student in 16 left with a Ph.D. Net, the place was a death march. Gee, IIRC in the Battle of Britain, of the fighter pilots, only one in six died. That, too, along with the Dyson remark and the titanium, could be valuable warnings for others. Or, on drop out rates, many Ph.D. programs make the Army Rangers and the Navy Seals look like "fuzzy, bunny play time". Dangers are part of story telling! Or, when see such dangers, don't go there; change course. If got caught in the danger zone, then back out.
The NYTimes article summarizes it this way: "For hundreds of years, the best violin players have almost unanimously said they prefer a Stradivari or a Guarneri instrument... Why nobody has been able to replicate that sound remains one of the most enduring mysteries of instrument building.
Here's the thing, is there actually a notably different sound? I have read the study that shows professional musicians don't necessarily prefer the sound of a stradivarius over a high quality new instrument, that doesn't necessarily mean they don't sound different. How good are they at telling the difference between these instruments, is it something a non-musician could notice or be trained to notice relatively easily.
Ideally, a researcher would be able to quantify the tone that is elusive. Alternatively, a team of listeners who can clearly distinguish between the two, reliable, would be useful. Because it sounds like the goal here isn't so much to get a really nice sound, it's to figure out why these instruments sound different (if indeed they do!)
I read the abstract, and it sounds like they've analyzed the composition of the violins and have found some notable chemical differences in the wood. It's not an uninteresting result, but I still have to wonder if we're a few steps ahead of ourselves here. First things first, do Stradivarius instruments, as a group, have an identifiably different tone or acoustic quality that makes it possible, either through acoustic measurements or trained human evaluation, to reliably classify them apart from other instruments.