News for hackers. Stuff that matters.
Re:Western Digital Announces Ultrastar He12 12 TB and 14 TB ... by X86BSD on Friday December 09, 2016 @07:54PM (#13143275)
I run stripped mirrors with ZFS. 2x2. RAIDZ is simply to slow in comparison. Like A LOT slower. Ill just eat the storage loss with mirrors. Disk is cheap.
Re:Western Digital Announces Ultrastar He12 12 TB and 14 TB ... by raattgift on Saturday December 10, 2016 @07:33AM (#13145381)
Disk is cheap, but how you attach the disks starts becoming an important cost component as you add more disks. :-(

IOPS aren't cheap, and you will find out just how much that matters the moment you have to replace a disk in a pool with a lot of data in it. Resilver times of days can be pretty agonizing in a home setting.

I won't build a pool without at least double redundancy per rotating-drive vdev, meaning at least 3-way mirrors (zpool create foo mirror disk0 disk1 disk2 mirror disk3 disk4 disk5) or raidz2, as I have had to go to backups for failures during resilvers of raidz (never again!) and 2-way mirrors.

3-way mirrors conveniently provide high read IOPS. OpenZFS does a good job aggregating and scheduling writes to the point that writes are mainly choked by random reads. (Very full pools induce quasi-random reads while hunting for space in metaslabs, which is the main reason writes to very full pools perform poorly).

2-way mirrors are only really fine for vdevs that have negligible random-access penalty (and thus likely high IOPS), or where rebuilding an entire pool from backups takes time comparable to resilver and scrub times when dealing with a replacement leaf device that might fail during resilvering (you cannot know the data on the replacment device is OK until you have read it, which generally means scrub-after-resilver), or errors reading the surviving leaf device(s).