News for hackers. Stuff that matters.
Re:Mirai Botnet Client, Echo Loader and CNC source code by Animats on Saturday October 22, 2016 @02:08AM (#12767475)
This thing's strategy for finding machines to take over is so simple it's embarrassing. It tries to open an unencrypted Telnet connection to random IP addresses. If it gets a response, it tries the following username/password combinations:

    root     xc3511
    root     vizxv
    root     admin
    admin    admin
    root     888888
    root     xmhdipc
    root     default
    root     juantech
    root     123456
    root     54321
    support  support
    root     (none)
    admin    password
    root     root
    root     12345
    user     user
    admin    (none)
    root     pass
    admin    admin1234
    root     1111
    admin    smcadmin
    admin    1111
    root     666666
    root     password
    root     1234
    root     klv123
    Administrator admin
    service  service
    supervisor supervisor
    guest    guest
    guest    12345
    guest    12345
    admin1   password
    administrator 1234
    666666   666666
    888888   888888
    ubnt     ubnt
    root     klv1234
    root     Zte521
    root     hi3518
    root     jvbzd
    root     anko
    root     zlxx.
    root     7ujMko0vizxv
    root     7ujMko0admin
    root     system
    root     ikwb
    root     dreambox
    root     user
    root     realtek
    root     00000000
    admin    1111111
    admin    1234
    admin    12345
    admin    54321
    admin    123456
    admin    7ujMko0admin
    admin    1234
    admin    pass
    admin    meinsm
    tech     tech
    mother   fucker
That's it.

Deploying millions of devices with fixed passwords that dumb is clear evidence of gross negligence on the part of IoT device manufacturers. If this gets to court, some lawyer is going to enter that list as evidence and read it to a jury.

"That's the kind of combination an idiot would have on his luggage!" - Spaceballs

Re:Mirai Botnet Client, Echo Loader and CNC source code by milankragujevic on Saturday October 22, 2016 @10:37AM (#12768831)
LOL it's missing "admin/ztonpk, admin/tzlkisonpk, telekom/telekom" which are default passwords for root access on Telekom Serbia's modems (7-8 million devices including IPTV STBs)... It's so stupid I have to use their shitty modem and can't change the pwd because they occasionally flash new firmware to it and reset everything to default, because that's how they configure the xDSL settings.
Re:Mirai Botnet Client, Echo Loader and CNC source code by kodisha on Saturday October 22, 2016 @07:10PM (#12771006)
so true.
Re:Mirai Botnet Client, Echo Loader and CNC source code by gnarbarian on Saturday October 22, 2016 @02:35AM (#12767536)
Oh crap. That has like two of my passwords in there.
Re:Mirai Botnet Client, Echo Loader and CNC source code by misnome on Saturday October 22, 2016 @10:04AM (#12768717)
Dammit, I thought we solved this 10+ years ago when home router manufacturers finally started printing unique passwords on the base of the product.
Re:Mirai Botnet Client, Echo Loader and CNC source code by coord on Saturday October 22, 2016 @03:49AM (#12767698)
I cannot wait for some type of top-down pressure to force IoT developers to take security seriously. The movement has been pushed into overdrive thanks to insane levels of competition where you either crush your R&D into the smallest breakneck period or you live to see your creation being sold for half of what your budget can allow by other firms lifting your efforts while you're still at the workbench.[1]

I've been getting cozy with Shenzhen-based hardware accelerators for the past year as part of a personal side-venture and I have not seen a group so pressured to deliver a product as fast as possible with security being a casual afterthought. To get a decent taste of what it's like, I wholeheartedly recommend WIRED's Future Cities documentary on Shenzhen and the companies that dwell there.[2] Their struggles for ephemeral market-share are endemic of the entire community that's taken over embedded hardware for the past few years.

The saddest aspect of it all is that this market competition isn't benefiting the consumer. IoT devices are coming out of the factories poorly engineered, badly maintained for far too short of a time, and as we've learned from this attack, being used as vectors for network intrusion and distributed censorship. Even arduino founder Massimo Banzi's widely-lauded IoT Manifesto[3] fails to approach any comprehensive statement regarding a dev's responsibility to build in some level of security to their devices.

It just isn't part of the fast-and-loose culture that has been bred by trend-setting companies with unlimited budgets making bad decisions from the very start.[4] In addition, the if-you-can't-beat-'em-join-'em attitude the West has taken towards churning out hardware devices as fast as they can before jumping to the next IoT piece of junk before the ripoffs can hurt them is really disappointing as it prevents any considerable effort from going into a device pre-and-post release.

All in all, the IoT community is not going to change their priorities unless someone very powerful forces them to and it can't happen soon enough.

[1] http://qz.com/771727/chinas-factories-in-shenzhen-can-copy-p...

[2] https://www.youtube.com/watch?v=SGJ5cZnoodY (This is over an hour long but very worth it)

[3] https://create.arduino.cc/iot/manifesto/

[4] https://techcrunch.com/2014/01/06/nest-4-0-firmware-battery-... & again in 2016 http://www.nytimes.com/2016/01/14/fashion/nest-thermostat-gl... I'm not going to even touch the dropcam and IoT smoke detector.

Re:Mirai Botnet Client, Echo Loader and CNC source code by Klathmon on Saturday October 22, 2016 @09:03AM (#12768507)
> the IoT community

I hate this phrase. It's not like a bunch of people gathered and said "let's make shitty IoT stuff!". It's not a "community", there aren't groups around advocating against security best practices.

If anything the actual community around IoT stuff takes security more seriously than most HNers.

The problem is the companies and manufacturers that aren't part of the community.

And I take issue with your [4]. That has nothing to do with security. It was a glitch, and it happened, and I personally don't like Nest as a company very much and think they make pretty shitty products, but they take security seriously, and in a discussion about IoT security linking a non-security related software bug serves no purpose. Everything has bugs, that doesn't mean it's absolute shit when something goes wrong.

Your [3] is also incorrect. The Arduino IoT Manifesto's second point is that a dev should make sure their product can be updated, and even if it's abandoned it should be able to be repurposed in something else, or updated by someone else.

Re:Mirai Botnet Client, Echo Loader and CNC source code by tomjen3 on Saturday October 22, 2016 @03:49AM (#12767701)
What's up with 7ujMko? That one seems really secure.
Re:Mirai Botnet Client, Echo Loader and CNC source code by duskwuff on Saturday October 22, 2016 @03:57AM (#12767725)
It's a simple pattern on a QWERTY keyboard. 7UJM and MKO are each on a diagonal path.
Re:Mirai Botnet Client, Echo Loader and CNC source code by noselasd on Saturday October 22, 2016 @05:04AM (#12767929)
It doesn't matter how "secure" a password is if it's known. Quite a few vendors ships devices with a common factory password, stated in the manual. And people put those on ther internet.
Re:Mirai Botnet Client, Echo Loader and CNC source code by mschuster91 on Saturday October 22, 2016 @03:52AM (#12767708)
Hardcoded in some "firmware example" supplied by the vendor, someone REd the firmware and published the password on his blog, and then it was discovered by the author(s) of this malware.
Re:Mirai Botnet Client, Echo Loader and CNC source code by aivanise on Wednesday October 26, 2016 @11:23AM (#12797180)
then the jury will find that offending, because 8 of them have passwords like that ;)