> nor consuming any energy on your radio
This simply isn't true. You'll be using power to demodulate at a minimum. You'll also be using energy to ammplify the incoming signals and a variety of other things.
Yes, this is also the reason why GPS is so power hungry--it takes a lot of power to keep a GPS radio receiver operating.
Close enough for a quick reply, but it's not the "radio" using lots of power, it's the chip that's doing the signal processing. GPS signals are very weak (approximately -120dbm) and thus below the noise floor. It takes complex FFT operations that actually cause the power hungry nature to find the proverbial needle in the haystack.
Normally, "radio" includes the amplifiers and demodulators, even if they're digital.
> or consuming any energy on your radio
Listening is actually one of the more power-intensive things a radio does, because it tends to be active more of the time than transmitting does. For many radios power consumption is the same whether transmitting or receiving.
>For many radios power consumption is the same whether transmitting or receiving
This, is not right.
It's very different from when you hit "scan" and are actively sending broadcast packets on every frequency and waiting for the wifi routers to (actively) answer. Which really only happens when you pull down the list of nearby hotspots.