Also, touch plates get installed after the pool is constructed. I would expect those could easily be made to compensate for any size differences. That would leave a size difference at the start, but that's easily fixed, too.
Maybe I misread the article, but it sounds like the effective length of lane can change depending on various environmental conditions. I suppose you may the touch pad distance easily adjustable, but that would be lots of measuring while the swimmers are in the water.
Re:Why There Are So Many Ties in Swimming
by aftbit on Saturday August 13, 2016 @08:18PM
(#12283724)
You could maybe have some sort of system to measure the distance between the two sides of the lane in near-real-time (laser rangefinders can be accurate to ~1mm).
better just to call it a tie than play lawyer ball and break out the lasers for measurements
Re:Why There Are So Many Ties in Swimming
by kctess5 on Saturday August 13, 2016 @07:23PM
(#12283570)
What environmental factors would change the lengths of the lanes?
From TFA:
(Attempting to construct a concrete pool to any tighter a tolerance is nearly impossible; the effective length of a pool can change depending on the ambient temperature, the water temperature, and even whether or not there are people in the pool itself.)
The concrete of the pool being hot/cold... It could, theoretically I guess, cause it to contract/expand by a non-insignificant amount.
Concrete on a footpath gets slots made every step or so, to prevent cracking from heat expansion. It's hardly surprising that concrete the length of the pool could have a centimeter or so of wiggle room.
However, I would expect that there is a high correlation between the size lengths of lanes in a single pool, so that one doesn't have one lane 3 centimeters too long and the one next to be 3 centimeters too short. It's weird that the standard doesn't make any requirements on that.
Also, touch plates get installed after the pool is constructed. I would expect those could easily be made to compensate for any size differences. That would leave a size difference at the start, but that's easily fixed, too.
Having said that, every few years or so there's a newspaper article of a swimming pool that gets constructed to be 50m, where the constructors forget about those touch plates.