Re:Restoring an unusual vintage clock display
by jsnell on Saturday July 30, 2016 @12:30PM
(#12193613)
I would imagine they wanted 6 identical modules just for the manufacturing efficiency.
That still leaves the question of why 12 lights instead of 10. I would bet that the separator colons are actually produced by a separate mask+lamp, rather than having different masks for each digit on those two modules. I.e. to show "8:" you light up both the "8" lamp and the ":" lamp at the same time. That gets us up to 11. No theory on the 12th one though.
Re:Restoring an unusual vintage clock display
by jameshart on Saturday July 30, 2016 @02:51PM
(#12194175)
Suspect it's just that the devices are a generic component, the application for projecting digits is just one possible application of a projection indicator. The physical constraints of the design require a rectangular projection array. 12 projectors, a 3x4 array, fits in a reasonable aspect ratio area. A 3x3 array would not suffice for this application, a 4x4 array would be overkill, and a 5x2 array, while optimal, would not fit well in the space available.
Re:Restoring an unusual vintage clock display
by S_A_P on Saturday July 30, 2016 @01:39PM
(#12193863)
One for each . In the colon?
Re:Restoring an unusual vintage clock display
by HCIdivision17 on Saturday July 30, 2016 @10:43PM
(#12195496)
Almost certainly this. In one of the links by another commenter here, you can see a voltmeter where the guy changes the decimal. The dots are bizarrely high to be a decimal point, but right where you'd expect it if it's the bottom dot on the colon.
Re:Restoring an unusual vintage clock display
by Symbiote on Sunday July 31, 2016 @05:16AM
(#12196236)
I didn't find that video, but several of these seem to be British made. The decimal point in British use was traditionally centred: 3·141.
(I still write it like that, in handwriting.)
These displays were made with many different mask options, including symbols and letters. I have a set where one mask is red (to give an optional red background to the displayed digit). For metering applications there were + and - masks. Etc.
??? There are only ten digits, and you don't even need all of them everywhere. By my reckoning, you would need 3+10+6+10+6+10=45.
If you add the ability to display dd-mm-yy, you till would only need 3+10+6+10+10+10=49. I wonder what they did with the remainder. Spelling out the word "ALARM!"?
Or did they simply ship spare bulbs inside the product?