News for hackers. Stuff that matters.
Re:Oscilloscope by blasdel on Monday March 22, 2010 @06:44AM (#1209967)
I've noticed that after being zapped like this, a lot of electronics manufactured in the last decade often just need to sit unplugged and self-discharge for a while. Real frustrating when you uncable it, fill out the paperwork, throw it on the cart, and take it down to maintenance, only to find that in a week when they get around to dealing with it shit starts working on its own.

Real common with power supplies that just don't work after an abrupt building power outage, but I've had it happen with protection circuits on ethernet and firewire ports too (though it took a lot longer).

Re:Oscilloscope by dfox on Monday March 22, 2010 @08:45AM (#1210162)
In case of sensitive HF inputs (eg. oscilloscope inputs) there is not much you can do about protecting them from overvoltage without significantly harming sensitivity or bandwith. In most cases such things are designed such that something relatively cheap blows up and can be easily replaced. But that something is usually input amplifier itself (overvoltage protection diodes that are fast enought tend to be more expensive and will also burn out so they are not used). It is worth to note that input amplifier transistors are cheap compared to whole scope, not compared to anything you would call cheap.

But miniaturization (and also precision requirements) tend to make replacing such things extremely labor intensive, so it might be more cost effective to simply throw the whole thing away.

Re:Oscilloscope by Retric on Monday March 22, 2010 @01:34PM (#1210852)
This seems like the type of thing you would have some sort of replacable card for. Assuming it's a fairly common problem.
Re:Oscilloscope by dfox on Tuesday March 23, 2010 @10:46AM (#1213012)
Many components of oscilloscope have to be physically close (because of delays, signal loss and interference) to input (ie. on same card) and in case of small 2-channel scope it can easily be third of whole scope (and more than third of price). Larger scopes tend to have replaceable cards for inputs, but such scopes are too large (and of course expensive) for most applications.
Re:Oscilloscope by CamperBob on Monday March 22, 2010 @05:22PM (#1211423)
There are actually several ways in which LeCroy could have protected the input against moderate overvoltage and ESD, such that repairs could be made without replacing the input hybrid. If nothing else, the guy could buy another half-dead scope on eBay for a couple hundred bucks, fix his bad channel, and have a near-complete parts donor left over for future repairs.

If he's the sort who's afraid of replacing the battery in his iPhone, he has no business monkeying with oscilloscopes and such anyway.

Re:Oscilloscope by samlittlewood on Monday March 22, 2010 @09:27AM (#1210225)
PolyFuses/resettable fuses (http://en.wikipedia.org/wiki/Resettable_fuse) are often at the root of that sort of behaviour.