News for hackers. Stuff that matters.
Re:A 32nm 1000-Processor Array by rntz on Monday June 20, 2016 @09:29AM (#11937860)
Arguably the first 1000-processor chip was the CM-1, made in the 1980's: https://en.wikipedia.org/wiki/Connection_Machine

They also bury the lede somewhat. Apparently the KiloCore is a 1.78 Terahertz chip:

> The energy-efficient “KiloCore” chip has a maximum computation rate of 1.78 trillion instructions per second

Edit: they later say it's 1.78 GHz. I guess "trillion" is just a mistake?

Re:A 32nm 1000-Processor Array by tlrobinson on Monday June 20, 2016 @11:23AM (#11938590)
Saying 1000 cores running at 1.78 GHz are a "1.78 THz chip" is a bit like saying 1000 cars driving at 65 mph are a "65,000 mph car"
Re:A 32nm 1000-Processor Array by DigitalJack on Monday June 20, 2016 @12:17PM (#11939002)
It is. But while it sounds absurd, there are cases where it makes sense. For loads that are parallelizable, both the 1.78 THz chip and 65KMPH car make sense for similes.

I wouldn't say they are a 1.78THz chip or 65KMPH car, but like them.

Re:A 32nm 1000-Processor Array by matt_d on Monday June 20, 2016 @12:46PM (#11939217)
It's a modern version of the megahertz myth: https://en.wikipedia.org/wiki/Megahertz_myth#Modern_adaptati...

I think this makes even less sense as we go to 1,000 processing elements -- even Amdahl's law is too optimistic for the workloads deployed in these scenarios (i.e., having an embarrassingly parallel computation workload doesn't help if we still need to access memory, including going through the shared interconnect(s) to do this, while also keeping cache coherence in mind--and most workloads have phases that have to be synchronized, assuming we eventually want to write the results of our computation somewhere): http://blogs.msdn.com/b/ddperf/archive/2009/04/29/parallel-s...

Re:A 32nm 1000-Processor Array by mafuyu on Monday June 20, 2016 @09:59AM (#11938048)
Instructions Per Second is different from the clock speed. In this case, it looks like each core is ~1 Instruction Per Clock, so 1 * 1.78 GHz * 1000 cores.

The trick is that getting 1.78 trillion IPS distributed over 1000 cores is very different from getting that over a few cores.

Re:A 32nm 1000-Processor Array by simonster on Monday June 20, 2016 @10:08AM (#11938108)
According to the link, the CM-1 had 16 processors on a chip, but there were a lot of chips (up to 4096 to yield up to 65536 processors). Still, the programming paradigms that were used for the Connection Machine might be useful for the massively parallel chip described here.
Re:A 32nm 1000-Processor Array by deadgrey19 on Monday June 20, 2016 @09:54AM (#11938013)
Maybe they mean "effective" speed. 1000x 1.78GHz = 1.78THz.

Assuming a job is embarrassingly parallel it might be an ok metric. Realistically, probably not.

Re:A 32nm 1000-Processor Array by CyberDildonics on Monday June 20, 2016 @10:01AM (#11938058)
... 1.78 GHz * 1000 processors ?
Re:A 32nm 1000-Processor Array by jacquesm on Monday June 20, 2016 @11:21AM (#11938580)
That wasn't a chip.