News for hackers. Stuff that matters.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @01:31PM (#11848535)
You can make a knife from a sharpened spoon, but you can do a lot more damage, more reliably, to more people, with a real sword. For now (although not forever) you're not going to 3D print an AR-15 Lower.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by beachstartup on Monday June 06, 2016 @01:43PM (#11848652)
> you're not going to 3D print an AR-15 Lower

this has already been done plenty of times, and i have a sneaking suspicion is far more widespread than anyone is letting on.

meanwhile, you can just buy a hundred 80% lowers off the internet for probably less than a grand, and keep them around just in case.

plenty of "normal" people stockpile this stuff. they just aren't telling anyone about it.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by Mizza on Monday June 06, 2016 @02:12PM (#11848914)
Not only can you already print a lower, you can print a bolt-together lower than can be printed on a commercial Makerbot or similar.

Here's a video: https://www.youtube.com/watch?v=42zpwpmGOvc

and another of it being test-fired: https://www.youtube.com/watch?v=_TXz9kb83yc

Re:Cody Wilson, the man who wants Americans to 3D print thei... by djloche on Monday June 06, 2016 @01:38PM (#11848598)
It is easier and more economical to mill with a cnc. It is probably far cheaper even to just walk to the gun store and buy a rifle than it is to 3D print something similar.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @02:45PM (#11849204)
A CNC is something that is pitifully easy for a regulatory agency to track, as far as large numbers of purchases go. See: that fellow who was milling AR-15 lowers and just got busted. We're talking about the difference between machining metal, and downloading and printing a schematic. I hope that you do see the difference.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by abakker on Monday June 06, 2016 @03:24PM (#11849537)
It is easier to track distributing a sold product. It is very difficult to track what a person makes in the comfort of their home. I dont think the federal government keeps a registry for the purchase of milling machines.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @04:10PM (#11849897)
If everyone who wants to own (to keep using this one example) an AR-15 had to buy a CNC, that would be quite the commitment. If the current model of people buying many milling machines and selling their services is the only viable way to avoid that, then you've already seen the feds start to take notice. After all, if you can get word of mouth around enough to make money, you're making enough noise to be heard.

3D printing is presumably going to become ubiquitous, and require no skill or experience to operate and maintain.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by int_19h on Monday June 06, 2016 @09:17PM (#11851766)
But that's the thing - with the present level of technology, you can have a device that is, essentially, pre-programmed CNC to make AR lowers (which is what Ghost Gunner is, for example) for under $300.

To make a fully functional firearm from there, you also need a complete upper - can be had for another $400 or so these days; and a complete lower part kit with buffer tube and stock - can be had for less than $100. For a total of $800, some assembly required (or you can pay another $50 and have pretty much any gunsmith put it together for you).

So basically, a person can take GG and produce an unregistered, untraceable, no-background-check-required AR with it for $800-900. For comparison, the Bushmaster AR that was used in Sandy Hook shooting costs ~$700.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by hga on Monday June 06, 2016 @09:31PM (#11851819)
The Ghost Gunner drills/machines the right holes in an 80% receiver, it doesn't start with a 0% receiver: http://www.80percentarms.com/products/0-billet-ar-15-lower-r...

But it's not very difficult to start at that level: http://motherboard.vice.com/read/the-cartel-gunsmiths $25K for a pro CNC machine isn't much in the scheme of things.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @11:40PM (#11852243)
For a cartel? It's nothing. For most people who want a particular gun, and don't intend to monetize the purchase, never mind the time taken to learn how to work and maintain it? That's a hell of a thing to be honest.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by hga on Tuesday June 07, 2016 @04:20AM (#11853119)
The real barrier is the knowledge, you don't need a relatively new CNC machine like that if you're just going to make a few for yourself. And old but high quality non-CNC machines are sufficient for that, and require a somewhat different set of skills.

But that's not the scenario I'm thinking about, nor is it relevant as of now in a country which has more than doubled its gun production since Obama was elected, with > 100 million being sold in that period (obviously not all those were new).

Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Tuesday June 07, 2016 @11:00AM (#11854943)
If the barrier to a decent firearm is knowledge of how to work and maintain and older CNC, that seems like a pretty excellent means of limiting firearms. "You're free to have what you can make from scratch, up to a certain point."
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @11:43PM (#11852256)
The cost argument is sound, and I'm not disputing it, but rather I'm thinking in the broader terms of the "Gun Control" debate. At some point in the future, maybe a decade, maybe two, supply-side gun control is going to be a pointless exercise. My argument however, is that the time has not yet come, although it's clearly on the horizon.

For now "Just get a CNC mill and learn how to use it" is still a substantial hurdle. I think it's fair to say that it's a hurdle that Adam Lanza wouldn't have managed to overcome.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by abakker on Tuesday June 07, 2016 @12:31AM (#11852408)
Gun buybacks are the best gun control method I can think of. supply side is problematic especially in the US, where the amount of owned, unregistered guns is enormous. I think the first step is reducing the supply of used guns. and, it has the side effect that the people who sell guns to government for cheap, likely would sell the gun for cheap to anyone. Might as well be the government, though.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by hga on Tuesday June 07, 2016 @04:15AM (#11853099)
In the US at least, there are three classes of people who are willing to sell guns cheap at a buy back, and this is why the concept has never taken off, along of course with the cost, which isn't effective at buying votes:

Criminals wishing to dispose of weapons used in crime.

Savvy types who sell guns that are worth less.

The ignorant/those who don't want to be bothered to easily dispose of guns that they've inherited or whatever.

The savvy types will work the line to buy guns from the latter that are worth significantly more than the price.

Re:Cody Wilson, the man who wants Americans to 3D print thei... by 0xffff2 on Monday June 06, 2016 @03:06PM (#11849393)
Easier than 3D printers? how so?
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @04:10PM (#11849900)
I'm saying the exact opposite.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by celticninja on Monday June 06, 2016 @02:36PM (#11849115)
Not everywhere has gun stores.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by fixxer on Monday June 06, 2016 @01:54PM (#11848769)
You can start with an 80% lower and a $20 router from Harbor Freight and get something pretty good depending on how you set up a jig. It ain't rocket science.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @02:46PM (#11849212)
No it isn't, but look at the instructions on a pack of ketchup some time and bask in the glory of the LCD. "Set up a jig" is alien babble to a huge number of people, for whom, "Press print" would not be.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by sgnelson on Monday June 06, 2016 @04:49PM (#11850230)
That's what the internet is for.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by Aelinsaar on Monday June 06, 2016 @07:09PM (#11851239)
Heh... sure. That, and blowing yourself up because the Navy Seal teaching you to make C4 was actually a 14 year old. The internet is a very YMMV experience, often that variance has to do with what you put into it. If the only people who can overcome a law are those smart and resourceful enough to learn how to mill their own guns, yet still criminally inclined, I'd say you've minimized your problem nicely.
Re:Cody Wilson, the man who wants Americans to 3D print thei... by angersock on Monday June 06, 2016 @01:49PM (#11848714)