Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by scurvy on Monday April 25, 2016 @03:32PM
(#11566702)
FYI, 25gbps ethernet is gaining in popularity much quicker than 40gbps ethernet. Mostly from cloud/scale-out stuff.
[ Parent
| on HN ]
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by nocarrier on Monday April 25, 2016 @04:55PM
(#11567286)
Hmm, that's interesting. We never did 25 and went to 40 and 100. Well, 10 for normal hosts, 40 for top of rack switches and heavy i/o hosts, and 100 and beyond for future TOR and aggregate switches.
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by scurvy on Monday April 25, 2016 @06:41PM
(#11567975)
It's mainly cost savings due to the simplicity of 25gbps ethernet vs 40gbps. This article has a good run-down: http://searchnetworking.techtarget.com/feature/25-Gigabit-Et...
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by pavs on Monday April 25, 2016 @04:23PM
(#11567042)
I always get confused with these, but are sfp/sfp+ ports also called ethernet ports? For whatever reason I associate ethernet with cat5/6 cable ports.
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by dsp1234 on Monday April 25, 2016 @04:41PM
(#11567185)
sfp/sfp+/qsfp are just the connector types, and can terminate cables that are made of copper or fiber. This is a separate issue from what protocol (ethernet/infiniband/etc) is running over that cable.
For an example, take a look at Mellanox's cable page which lists a large number of combinations of connectors and cable types.
So in general, to call a random sfp cable/port an ethernet port would be confusing unless both parties already knew it was passing ethernet traffic.
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by pavs on Monday April 25, 2016 @04:45PM
(#11567217)
Thanks for the explanation.
Re:Storage Pod 6.0: Building a 60 Drive 480TB Storage Server
by ecnahc515 on Tuesday April 26, 2016 @12:15AM
(#11569382)
I'm mostly mentioning this because it's something I just recently re-learned about.
The actual connector and cable are mostly independent of each other. The most common connector for an ethernet cable is RJ-45 (what you're referring to as "ethernet ports"). But it's just as possible to have SFP, coaxial, or USB even.