News for hackers. Stuff that matters.
Re:OpenBSD 5.9 released early by hackuser on Tuesday March 29, 2016 @05:48PM (#11385189)
802.11n

Another big one for laptop users: initial support for N wireless has landed in both the iwm(4) and iwn(4) drivers.

Does that mean that 802.11n wasn't supported by OpenBSD until now? 802.11n was first available in (2010?) and is no longer the current version (802.11ac is).

Re:OpenBSD 5.9 released early by nayden on Tuesday March 29, 2016 @08:22PM (#11386084)
Reversing firmware without documentation takes time. Especially when a single developer does it on their spare time as a hobby.
Re:OpenBSD 5.9 released early by ashitlerferad on Wednesday March 30, 2016 @04:20AM (#11387734)
Does OpenBSD actually write open WiFi firmware?
Re:OpenBSD 5.9 released early by antoinealb on Wednesday March 30, 2016 @04:58AM (#11387914)
No. But they still have to write drivers that will interact with those firmwares.
Re:OpenBSD 5.9 released early by brynet on Tuesday March 29, 2016 @05:54PM (#11385230)
802.11n is a lot more complicated than its predecessors, OpenBSD has it's own wireless stack and drivers. A lot of 11n hardware was supported in a/b/g modes only.
Re:OpenBSD 5.9 released early by cmurf on Tuesday March 29, 2016 @06:06PM (#11385317)
I've found the same on Linux with the Broadcom chips that at least Apple users in laptops. Maybe the proprietary driver supports it.
Re:OpenBSD 5.9 released early by sigzero on Tuesday March 29, 2016 @05:56PM (#11385246)
I imagine wireless is a "secondary" concern for the OpenBSD team given the focus on the server.
Re:OpenBSD 5.9 released early by stsp on Tuesday March 29, 2016 @06:15PM (#11385377)
Not really. Most OpenBSD developers run OpenBSD on their laptops which of course includes wifi.

The real reasons are that 11a is still good enough for many use cases, and that OpenBSD's wireless developer department is seriously understaffed (apply by sending a patch).

Re:OpenBSD 5.9 released early by silverforgotapw on Tuesday March 29, 2016 @06:45PM (#11385586)
No one uses a. It was not a 2.4Ghz radio and not compatible with the b/g/n/ac cards that came after it.
Re:OpenBSD 5.9 released early by matthewmacleod on Tuesday March 29, 2016 @09:36PM (#11386365)
I don't think this is true - AFAIK most 5Ghz hardware supports 802.11a.
Re:OpenBSD 5.9 released early by SyneRyder on Wednesday March 30, 2016 @03:50AM (#11387597)
While only anecdata, I've got a 5Ghz router and 802.11a is not an option (but 802.11b is).
Re:OpenBSD 5.9 released early by fulafel on Wednesday March 30, 2016 @03:53AM (#11387606)
New base stations don't typically have options for 11a-only 5 GHz, but 5 GHz capable 11n clients can still connect to older 5 GHz 11a networks. I imagine there is similar backwards compatibility to the other direction even without an explicit configuration option.
Re:OpenBSD 5.9 released early by stsp on Wednesday March 30, 2016 @04:24AM (#11387756)
Wow, so much doubt. I'd normally link Wikipedia, but this is HN so let's just quote the spec to clear this up once and for all.

Legend:

PHY: think of this as "wifi radio"

HT: "High Throughput" aka 802.11n

"Clause 20": HT PHY specification

"Clause 19": 802.11g PHY specification

"Clause 18": 802.11a PHY specification

"Clause 17": 802.11b PHY specification

STA: any 802.11 capable device

[[[

20.1.1 Introduction to the HT PHY

Clause 20 specifies the PHY entity for a high throughput (HT) orthogonal frequency division multiplexing (OFDM) system.

In addition to the requirements found in Clause 20, an HT STA shall be capable of transmitting and receiving frames that are compliant with the mandatory PHY specifications defined as follows:

— In Clause 18 when the HT STA is operating in a 20 MHz channel width in the 5 GHz band

— In Clause 17 and Clause 19 when the HT STA is operating in a 20 MHz channel width in the 2.4 GHz band

]]]

Translation: All of 11a/b/g are a proper subset of 11n.

11ac is 5GHz only. I assume it's backwards compatible to 11a but I haven't read the 11ac spec.