Pumped storage is great, but not in your house or for an off-grid hut in Africa. One interesting application of pumped storage is applying it to tidal power. You could build a tidal lagoon and not only get the super reliable free tidal energy but also use it as a store. Pump extra water out or in when renewable sources are producing. Then use the power when demand is high.
This is covered a bit in this excellent free book: http://WithoutHotAir.com
According to this [1] a typical hot water cylinder wastes less than 2000 kWh per year. That's a yearly expense of less than $400. This means a replacement system aiming to break even over five years must cost less than $2000.
Replacing a hot water cylinder with a bog standard new one costs at least $1000. Thus the PCM heater must be essentially as cheap as existing solutions, and so it faces the challenge of not being able to get enough initial volume to get the cost below break-even. Government subsidies are probably the only way to make it work.
[1] http://www.solarblogger.net/2012/11/heat-losses-from-hot-wat...
https://en.wikipedia.org/wiki/Phase-change_material
Found a few vendors of various interesting products, here's just one:
Found a few articles advocating water heaters using PCM. Sounds cool.
Aside: I've tried HotSnapZ brand hand warmers. They're reusable. Neat. I should have guessed this strategy could be scaled up for bigger applications.
Train energy storage is driving a trainload of concrete blocks uphill when power is cheap and doing regenerative braking on the way down[1]. It's just like pumped hydro, but without the need for water.
Molecular spring energy storage is essentially making a windup mechanism, except with advanced materials like carbon nanotubes. Unfortunately it is not very practical today.[2]
[0] https://en.wikipedia.org/wiki/Superconducting_magnetic_energ... [1] http://www.gizmag.com/ares-rail-energy-storage/28395/ [2] https://en.wikipedia.org/wiki/Carbon_nanotube_springs
- Pumped hydro, by far the most widespread
- Flywheel storage, used at grid scales for frequency regulation
- Thermal storage used in conjunction with solar power using various materials - molten salt, HTF, hot dry rock
- Many different battery chemistries:
- Compressed air storage- Phase change storage, including hybrid compressed/liquefied air storage
- Seasonal thermal storage https://en.wikipedia.org/wiki/Seasonal_thermal_energy_storag...
- Water electrolysis + hydrogen fuel cell cycle
Probably missed a bunch too. All to say there are a lot more solutions then lead-acids and lithium batteries- although in fairness those are the most accessible options in small scale systems