Re:Turing Robotics Starts to Manufacture Phones Based on the...
by nextos on Friday February 26, 2016 @07:53AM
(#11181098)
It'd be lovely if all these efforts crystallized into a truly open Linux-based mobile platform available to the masses, even as a niche thing.
Sailfish is far from open yet, but it's a very good OS.
Nokia produced incredibly good hardware, with the added benefit of a physical keyboard in case of the N900. This is a must. They seem to be getting back to business. It'd make a lot of sense for them to buy Jolla and rebuild Maemo, which should have never been discontinued!
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by eggy on Friday February 26, 2016 @08:20AM
(#11181185)
Good news for Salo, and privacy efforts. I would like to see it take off. I don't know if a truly open mobile platform has to be Linux-based; it might be time to start fresh.
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by ulber on Friday February 26, 2016 @06:15AM
(#11180847)
Nokia had an assembly plant in Salo, which it closed down in 2012 I think. So there's probably still quite a bit of work force trained specifically for this job available in Salo.
Also good news for Salo (my home town)! Salo hasn't been doing so well financially since Nokia left.
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by hankide on Friday February 26, 2016 @07:02AM
(#11180965)
That's great news for Salo. It's been struggling to get back on its feet after the Nokia "incident" and I know many former employees who still live there and have most of the required skills and knowledge to start work again.
I also lived in Salo for most of my childhood and had a summer job in Nokia. These news make me very happy!
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by skykooler on Friday February 26, 2016 @11:20AM
(#11182187)
I wonder whether the Turing phone will work in the US? The Jolla phone doesn't work very well because the chipset doesn't support US 3G or 4G frequencies.
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by csn on Friday February 26, 2016 @06:27AM
(#11180878)
The article correctly quotes 10-20 jobs per 1k units, but the mayor of Salo has apparently said[0] that there's probably an extra zero there, so reality could be closer to one or two per 1k.
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by fractallyte on Friday February 26, 2016 @01:04PM
(#11182873)
I received my Jolla phone just two days ago, after a slight delay. (The company was open about this, so I had no feelings of forboding.) I'm delighted with it!
Sailfish OS is smooth and efficient, and Android blends seamlessly into the system.
Understandably, parts of the OS are closed-source (it is a commercial project, after all), but the open parts make it incredibly easy to hack for; it's far more accessible than any other phone OS. One wants Sailfish to succeed!
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by vlehto on Friday February 26, 2016 @09:51AM
(#11181630)
I'm very skeptical of the "liquidmorphium" frame.
For phone frame I would wan't high scratch resistance and high toughness. Especially high toughness, so it doesn't shatter on impact. Liquid metals are high strength, low toughness. I don't need the strength, as I usually don't use my phone as structural element. OK it tries to bend a little in my pocket, but that's relatively small stress. ABS plastic seems to be doing fine against that.
Re:Turing Robotics Starts to Manufacture Phones Based on the...
by 2b2not on Saturday February 27, 2016 @12:43PM
(#11187774)
As well, we are up against the wall of, only those who use this particular phone will actually be secure. Security needs to work with every phone not just this one. Useless imo
Sailfish is far from open yet, but it's a very good OS.
Nokia produced incredibly good hardware, with the added benefit of a physical keyboard in case of the N900. This is a must. They seem to be getting back to business. It'd make a lot of sense for them to buy Jolla and rebuild Maemo, which should have never been discontinued!
Also good news for Salo (my home town)! Salo hasn't been doing so well financially since Nokia left.
I also lived in Salo for most of my childhood and had a summer job in Nokia. These news make me very happy!
https://www.turingphone.com/ https://www.google.com/webhp?q=destiny+logo
[0] http://m.iltalehti.fi/digi/2016022621178689_du.shtml
Sailfish OS is smooth and efficient, and Android blends seamlessly into the system.
Understandably, parts of the OS are closed-source (it is a commercial project, after all), but the open parts make it incredibly easy to hack for; it's far more accessible than any other phone OS. One wants Sailfish to succeed!
For phone frame I would wan't high scratch resistance and high toughness. Especially high toughness, so it doesn't shatter on impact. Liquid metals are high strength, low toughness. I don't need the strength, as I usually don't use my phone as structural element. OK it tries to bend a little in my pocket, but that's relatively small stress. ABS plastic seems to be doing fine against that.