I don't know what an electric guitar costs or what its made from (MDF?) but this would be a reasonable starting point. It depends if you just want bits or if you also want assembly and finishing.
Pricing varies, but we have no setup costs (i.e. the expensive up-front part about mass production), so a single part can be as cheap as about $50.
If you really want to use CNC for a one-off you should get in contact with your nearest FabLab or Hackerspace. They usually have something around (though hackerspaces often not and if rather small machines)
My advice would be to ask a carpenter to help you out, if you are comfortable with using the tools, or you bring by the (exact) drawings and a block of wood of your choosing. Once again, if you need special kinds of wood, talk to those guys, the should have some nice dry maple and mahagony around.
Lionel from Hatch here. Indeed, we work on prototype and development of products willing to go to mass production.
Recently I discovered this site http://tempoautomation.com/. It may be what you need for your custom electric guitar.
They are in LA but wherever you are you can send your design and specs to get your prototype built.
Hope this can help :)
They have manufacturing facilities in the UK that ship to Germany.
Two near my house let you use their gear after getting certified (trained). Then you pay per minute.
A third MakerSpace has the gear, but they operate it for you. I was prototyping a laser engraved product. Working thru someone else's hands was expensive and unsatisfying.
Can anyone with experience in doing this tell me if it is feasible to get CNCed products made as one offs?
It seems likely that this step is part of a longer and highly involved process resulting in mass production, which wouldn't be appropriate for me.
Can anyone offer experience/tips for getting this kind of CNC work done as a one off. I live in Germany.
Thanks in advance.