I am curious though. If you are using about .09 or .10 an hour in total (for the brief period I looked at the graph), how were you able to achieve such high savings? Did you get rid of unnecessary appliances, or simply find ways to reduce consumption?
Actually, shifting to off-peak is a good outcome since fewer spinning reserve plants (usually the least efficient) are needed. But, as you say, not really the desired outcome.
My baseline use tends to run at about 300W. We first did obvious things like replace some of our lighting with CFL, and we got rid of an old chest freezer we didn't need. We changed behavior through learning to turn off lights when we left a room. There were some no-brainer things (my stereo apparently allows multi-room hookups, and if you have the buttons turned on, it uses several hundred watts to do nothing. I replaced a fileserver + routers with an Apple Time Capsule and saved 100+ watts. We use the dryer differently. And we installed a few BITS smart strips. The reason our savings are high is partly because I live in the Boston area, where our electricity rate is currently $0.19/kWh, I think. Bottom line was that we made a lot of little changes. I have written about most of them in my personal blog, called fivepercent.us if you're interested.
Gridspy in a typical business will pay for itself within a year, as most businesses use in excess of $1000 a month. All it takes is the opportunity to educate the employees to turn off PCs at night and to identify the expensive lights in the building and the power usage goes down by 10%.
I'll soon have some nice case studies to back up this widely held belief in the power of live monitoring.