A home that can be moved post-construction can also enable arrangements where the home itself is owned, but the installation site is rented, which can make housing more affordable in places where property area is very expensive.
We also have a problem in the US where all the good quality and low cost lumber has already been harvested. The 2x4 studs typical of stick-built construction are now cut from fast-growing trees of relatively small diameter, such that you can see the curvature in the grain at the end of the stud, the grain is mostly parallel to the longer dimension, it's full of knots, and it changes shape whenever the humidity level changes. You just can't squeeze a good 2x4 out of an 8" diameter log, no matter how you try to cut it.
And yet the overwhelming majority of new single-family homes are still built with wooden 2x4 studs. This is one reason why doors start sticking in their frames after only a few years since a new house was built.
A lot of this is driven by local building codes that will not adapt to newer building methods. There are better, more cost-efficient ways to build houses, and people are literally forbidden from using them. Manufactured homes are instead ruled by the HUD building codes and inspectors, so building something off-site and trucking it in may be the only way to get a home with a particular construction method in a given place.
From the outside, it would look like an ordinary apartment building, which seems more palatable to most folks than a row of slightly angled transportable manufactured homes.
On-site construction consists of a concrete foundation pad, steel racks, and an outer weather shell appropriate for the region. Utility hookups are provided for each berth.
When a new housing unit is needed, it arrives in an intermodal shipping container, rolls into an open berth in the rack, is anchored in place, and the utilities are connected. If anyone needs more space, the internal doors and modules can be reconfigured to join multiple units internally.
Current manufactured housing in the US is premised upon hauling the pieces to the site by truck. If housing could also be moved by container ship and stacktrain, it is more easily importable and exportable.
A size standard for home modules opens up a huge aftermarket. Don't like the factory-installed kitchenette or don't cook? Swap it out for an exercise room or workbench or hydroponics garden or nursery or whatever else you may want in its place. It fits. The utility connectors are in the same place.
The number of berths in a rack and the size of the outer weather shell can be different for different housing markets. One near a city might have multiple levels, cramming dozens of units into a single shell with a fashionable brick facade. One far out in the country could have space for as little as just one unit--and it might not even be filled all the time--but it might also have a tornado-resistant outer concrete shell.
If you change jobs, rather than pack up your possessions, you could just secure all your loose items inside and ship your owned housing units to an empty berth in a new rack, across town or in a different city.
The major problem is lack of elbow room. You just can't cram very much living space inside a shipping container, so even if you connect many units, your home still consists of a maze of doors joining a bunch of 48 sq.ft. rooms.