News for hackers. Stuff that matters.
Re:I Built Myself a 16x20-Inch Camera in 10 Hours by stan_rogers on Sunday January 24, 2016 @10:43PM (#10965437)
You might be amazed; printing above the industry-standard 300ppi can give you a picture you can never get close enough too, but even at more reasonable viewing distances you can tell the difference in acutance. 480 ppi is a good value for the current crop of Epsons (you'd need a RIP and a lot of farting around to do better, but you can get up to 720). It's sort of like the difference between a contact print and an optical print at the same size; there's no more detail as such at a typical viewing distance, but the edges of the details you can see are sharper.

As for the scanner, if you don't really need a car, you can always get a Flextight. (They really are that good, but they really are too expensive nonetheless.)

Re:I Built Myself a 16x20-Inch Camera in 10 Hours by Finnucane on Monday January 25, 2016 @10:00AM (#10967480)
I'm aware of the affect of dpi on the print. Sure, I suppose I could also get a second-hand drum scanner, too; sometimes you can get them for cheap. A Flextight is nice but it still a CCD scanner, it is not going to match a PMT.