Re:Big RAM laptops are abundant as Lenovo does its Skylake r...
by monocasa on Monday January 04, 2016 @12:46PM
(#10837040)
Unfortunately the FTDI stuff (really any USB<->UART converter) has latency issues in the embedded space. : \
[ Parent
| on HN ]
Re:Big RAM laptops are abundant as Lenovo does its Skylake r...
by seiferteric on Monday January 04, 2016 @01:05PM
(#10837191)
I was wondering, would it be possible to create a better converter that did usb -> rs232/parallel port that had a special driver to put timing info? At least for driving CNC motors with a parallel port, timing is critical, you could send the pulse signal along with a timing, like 1 @ t0, 0 @ t0+1us etc.. Reading would be similar. The chip on the converter would have an accurate clock and faithfully reproduce the desired signal.
Re:Big RAM laptops are abundant as Lenovo does its Skylake r...
by pjc50 on Monday January 04, 2016 @03:28PM
(#10838297)
It could probably be done with isochronous mode (http://www.beyondlogic.org/usbnutshell/usb4.shtml#Isochronou...), but realistically it's easiest to just delegate all the real-time stuff to a $1 microcontroller on the other end of the USB link.
Re:Big RAM laptops are abundant as Lenovo does its Skylake r...
by oxplot on Monday January 04, 2016 @01:51PM
(#10837576)
After having a quick look at all the external interfaces of my laptop, the only one that has a predictable latency (that I know of) is the microphone/headphone jack. It should be fairly trivial to convert a serial digital data to an audio signal that can be reverted back on the other end. Of course, initially the jack latency needs to be measured (e.g. using a loop connection) and accounted for.