News for hackers. Stuff that matters.
Re:Engineers demo first processor that uses light for ultraf... by yelnatz on Thursday December 31, 2015 @05:27AM (#10817073)
> The photonic I/O on the chip is also energy-efficient, using only 1.3 picojoules per bit, equivalent to consuming 1.3 watts of power to transmit a terabit of data per second. In the experiments, the data was sent to a receiver 10 meters away and back.

They mentioned this, but didn't compare it to classic electrical chips.

Does anyone know what we have now?

Re:Engineers demo first processor that uses light for ultraf... by exDM69 on Thursday December 31, 2015 @07:36AM (#10817355)
> Does anyone know what we have now?

I can't quote exact figures but to give a ballpark figure, we're talking about ~5 picojoules per bit at a distance of less than 10 millimeters. This is on a modern (20 nm) SoC.

So we're talking about a pretty significant improvement in power consumption and communication distances. A modern chip running at 2-4 GHz requires several clock cycles for a bit to reach from one corner of the silicon to another. It's becoming a major hurdle to think about when designing chips.

Re:Engineers demo first processor that uses light for ultraf... by thecopy on Thursday December 31, 2015 @08:49AM (#10817535)
Does this imply that it will be possible to increase the clock-speed 5/1.3=3.8 times and still be able to cool the CPU with basic air-cooling?
Re:Engineers demo first processor that uses light for ultraf... by exDM69 on Thursday December 31, 2015 @09:02AM (#10817571)
No, I don't think so. I don't think that light can be used to replace all (metal) conductors on a silicon chip, at least in the near term.

However, this technology has the potential of bringing performance gains to on-chip memories such as L1 and L2 caches as well as software configurable scratch pad memory. Other possibilities that spring to mind are faster core-to-core communications as well as bundling more cores on a same die as the faster communication makes physically larger dies possible.

disclaimer: I work in the semiconductor industry but this is not my area of expertise, my speculation is as good as anyone else's.

Re:Engineers demo first processor that uses light for ultraf... by typon on Thursday December 31, 2015 @12:07PM (#10818456)
No it doesn't. This does not affect clock frequency on a single CPU. This would improve bandwidth and latency in I/O with off chip circuitry such as memory or co-processors (like GPU).
Re:Engineers demo first processor that uses light for ultraf... by madengr on Thursday December 31, 2015 @02:50PM (#10819295)
Why would it improve latency? At most it would reduce it by half; i.e. Free-space propagation vs traces buried in FR4.
Re:Engineers demo first processor that uses light for ultraf... by typon on Thursday December 31, 2015 @03:05PM (#10819381)
It wouldn't and you're correct. I don't know why I wrote that. Sorry!
Re:Engineers demo first processor that uses light for ultraf... by trsohmers on Thursday December 31, 2015 @02:36PM (#10819230)
Modern 12.5 and 28 gigabit SerDes are around 15 to 20 picojoules per bit when being used for something like PCIe3 over your standard FR4 PCB traces, while longer distance (like the linked work) is in the 30pJ/bit range. 1.3 picojoules/bit is a hug advancement, as the only things that get that low are over very short distances (I am working with a brand new SerDes for multi chip module communication that has an amazing 1pJ/bit, but only up to ~24mm).
Re:Engineers demo first processor that uses light for ultraf... by renox on Thursday December 31, 2015 @07:27AM (#10817329)
It's difficult to compare as for optical you have to add the power usage of the laser itself and for the electrical chips you may need repeaters (as stated in the article) depending on the length and bandwith used.