Re:Wooden high-rises change city skylines as builders ditch ...
by alricb on Sunday December 13, 2015 @07:29PM
(#10728656)
One possible problem is connections. You can make very large wood beams and columns, but then it becomes difficult to transfer the loads from one member to the other, because even a pretty big bolt will act on a fairly small area of wood.
Re:Wooden high-rises change city skylines as builders ditch ...
by vlehto on Monday December 14, 2015 @05:08PM
(#10734336)
It's would be very good guess, but that problem occurs with small scale wood too.
Re:Wooden high-rises change city skylines as builders ditch ...
by 3pt14159 on Monday December 14, 2015 @09:15AM
(#10731046)
Only a guess: The strength between the grains of the steel has less variation than the strength between the grains of the wood. So as you increase the cross sectional area the likelihood of splitting goes up.
Re:Wooden high-rises change city skylines as builders ditch ...
by vlehto on Monday December 14, 2015 @05:17PM
(#10734399)
Yeah, that is only easy reason I can imagine. You can cross the wood grain and turn it into "veneer". That would quickly average out natural wood grain out of it. But you can't cross the glue planes.
Now if you scale that up, the likelihood of having faulty glue plane could go up. It still doesn't sound like static stress problem. More like fatigue causing delamination.
I'm still bit suspicious because this would be too easy to explain.
I'd imagine it would go other way around, as knots are typically the weak spots. And with bigger structure knots would be averaged out.