Re:Raspberry Pi Zero Hidden in an Xbox Controller
by hamitron on Tuesday December 01, 2015 @01:54PM
(#10657793)
http://makezine.com/2012/02/28/how-to-splice-wire-to-nasa-st...
[ Parent
| on HN ]
Re:Raspberry Pi Zero Hidden in an Xbox Controller
by miahi on Tuesday December 01, 2015 @03:10PM
(#10658375)
I saw a lot of this splicing type in old military radio transceivers ("portable" for a given value of portable - usually some kind of backpack weighting ~30Kg - and the batteries were in another backpack).
That splicing works for solid-core conductors, but it doesn't have the same strength on stranded wire, as it is more flexible. It could work on tinned thin stranded wire (as it makes a kindof-solid wire) but if you tin it then you can just solder it and that's it. The referenced standard[1] also contains the splicing for stranded wire, and some requirements about when and how to use each.
Re:Raspberry Pi Zero Hidden in an Xbox Controller
by hatsunearu on Wednesday December 02, 2015 @12:28AM
(#10661183)
If you haven't noticed already, you are now aware that the two intertwined wires in the second and third section of that illustration is topologically impossible.
It's a pretty darn good technique though, useful when your wire harness is going through some minor tension. Extensively used during our underwater robot build :)